Classic SeaCraft Community
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Performance (http://www.classicseacraft.com/community/forumdisplay.php?f=5)
-   -   Yamaha's VZ300 VMAX HPDI (http://www.classicseacraft.com/community/showthread.php?t=12510)

John R 08-12-2003 05:24 PM
Re: Yamaha's VZ300 VMAX HPDI
 
I'll buy the Suzi.

23 footer wouldn't be over rated if it was a SeaCraft [img]images/icons/tongue.gif[/img] [img]images/icons/grin.gif[/img]

Ed 08-12-2003 05:52 PM
Re: Yamaha's VZ300 VMAX HPDI
 
I won't need shop towels anymore to plug up the Mako's scuppers, I chopped up SCOTT's rain gear that he left on board and I will be using that instead. (He-he)

John R 08-12-2003 08:18 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Quote:
Originally posted by Ed Mancini:
I won't need shop towels anymore to plug up the Mako's scuppers, I chopped up SCOTT's rain gear that he left on board and I will be using that instead. (He-he)
<font size="2" face="Verdana, Helvetica, sans-serif">http://www.striped-bass.com/vbulleti...milies/128.gif

SEAFARI 08-12-2003 09:08 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Ed,
300 HP Yammie on the Mako? Be carefull you might blow out both flip flops if you bury the dodger
into a wave! Do you think you'd beat Trayder in a
sprint to the Newport bridge? You can sell the 225
Minkota to John to troll bass! [img]images/icons/tongue.gif[/img] [img]images/icons/tongue.gif[/img]

Trayder 08-12-2003 09:52 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Blow out his flops......Not again Doah!!!! [img]images/icons/rolleyes.gif[/img]

Ed 08-12-2003 10:07 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Bad things happen only in three's right???

1) Why is that bilge pump on? Hmmmm..do you think is it because I forgot to caulk the bilge access hatch?
2) Blew out my Reef flipflop and as a result almost blew out my knee.
3) Burnt out the starter in my truck. Good thing there is truth to the old saying about whacking it with a hammer until she starts again.

SEAFARI 08-12-2003 10:21 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Ed,
Your problems are over!

http://cgi.ebay.com/ws/eBayISAPI.dll...category=11504

Chris

Ed 08-12-2003 10:48 PM
Re: Yamaha's VZ300 VMAX HPDI
 
Flip-flops on ebay....what's next?

Scott 08-13-2003 09:37 AM
Re: Yamaha's VZ300 VMAX HPDI
 
Quote:
Originally posted by SEAFARI:
Ed,
Be carefull you might blow out both flip flops if you bury the dodger
into a wave! Do you think you'd beat Trayder in a
sprint to the Newport bridge? [img]images/icons/tongue.gif[/img] [img]images/icons/tongue.gif[/img]
<font size="2" face="Verdana, Helvetica, sans-serif">Well .... That depends ....If Trayder gets a pair of those 225 Honda 4 strokes W/ Nitrous....
[img]images/icons/grin.gif[/img] [img]images/icons/shocked.gif[/img] [img]images/icons/grin.gif[/img] [img]images/icons/shocked.gif[/img]

ScottM 08-14-2003 10:59 AM
Re: Yamaha's VZ300 VMAX HPDI
 
"Blew out my flip flop, stepped on a pop top, had to cruise on back home..." - Ed, just make sure you have a batch of Margaritas and you'll be all set [img]images/icons/grin.gif[/img] .


All times are GMT -4. The time now is 09:30 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft