Classic SeaCraft Community - TRIM TABS

Page 2 of 2

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Performance (http://www.classicseacraft.com/community/forumdisplay.php?f=5)

- - TRIM TABS - NEW 20' CENTER CONSOLE (http://www.classicseacraft.com/community/showthread.php?t=16816)

2005SC20

07-13-2006 07:13 PM

Re: TRIM TABS - NEW 20' CENTER CONSOLE

Alright...here's an update with thoughts requested.

Currently, the engine is mounted in the second from the top hole (which would be second from lowering the engine the most). The cavitation plate appears to be approx 2 1/2" - 3" above the lowest point of the hull (center most point).

Seems most responses were to raise the engine...but I'm not sure this would be the best thing as I think it needs to go lower...but there is only the one last setting to lower it.

What do you think?

Ikan Besar

07-13-2006 08:38 PM

Re: TRIM TABS - NEW 20' CENTER CONSOLE

Quote:

What do you think?

I think you should put trim tabs on it regardless of list-to-starboard or where the engine is mounted.

RS	07-13-2006 10:11 PM

Re: TRIM TABS - NEW 20' CENTER CONSOLE

Quote:

Alright...here's an update with thoughts requested.

Seems most responses were to raise the engine...

But those were your responses :D
We said to check and the anti ventilation plate should be at least 1"

I'm not sure what this has to do with getting trim tabs though.

All times are GMT -4. The time now is 09:19 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page