Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   first post! (http://www.classicseacraft.com/community/showthread.php?t=16948)

nestorpr 08-07-2006 06:47 PM

Re: first post!
 
Let me know when you'll have the cabin door and the bulkheads out since I could use those for my boat. ALso the side coaming panels that cover the hull sides if they're in good shape. Hell, I'l even take a look at the windshield and side windows.

NoDoze 08-07-2006 09:48 PM

Re: first post!
 
Botapete, everythings off excpet the bulkheads and side windows.
The doors are nice, its teak, screened with a removeable plexi insert.
Also have the original vinyl cushions for the cabin. A nice 70's brown little dirty, but nothing a scrubbing wont clean up quick.
No coaming panels on this one, was just carpeted. You didnt want to see what came out of that :eek:
Lots a teak trim pcs too

NoDoze 08-07-2006 09:52 PM

Re: first post!
 
"You're a sick bastard Krispy"
Dont I know it John :D , always the black sheep I guess

nestorpr 08-08-2006 01:14 AM

Re: first post!
 
The door sounds nice! What trim pieces do you have?

NoDoze 08-08-2006 04:18 PM

Re: first post!
 
Teak grabrail for passenger side, and teak rails creating the bulkhead shelf along the sides.
Also have the aluminum bowrail, if anyone needs one for a 20'
Anyone need a complete Volvo Penta QA145 and outdrive?

Bigshrimpin 08-08-2006 04:32 PM

Re: first post!
 
Put it on Craigslist . . . I've seen similar volvo AQ series combos selling for about $800 - $1000. Which drive do you have? 270 or 280 ???

nestorpr 08-09-2006 03:12 PM

Re: first post!
 
How much and does it run??

oldbluesplayer 08-09-2006 06:14 PM

Re: first post!
 
NoDoze -

Teak grabrail for the passenger side - talk to me -

I've been looking for something like that - a pic, maybe?

Where did it mount?

Thanks
Bill

NoDoze 08-10-2006 01:36 PM

Re: first post!
 
Hi all,
the teak rail is a 2 handed model, thats mounted horizontaly in front of the passenger seat at the top of the bulkhead.
I just got a new camera, its charging, so Ill take pics 2night.
The motor ran, when I bought it a few weeks ago. I was told they did a compression check and all was good. Thats pretty much what I know, as I never intended to keep it or know much about i/o's. Everything comes with it, controls, steering etc, whatever you want.

Just looking for DOUGHnations to the project, and see the parts go to goood use to fellow SC owners.
Also have a teak swim platform, orig. aluminum rub rail and the origianl head-unit w/ all the plumbing.
I think there may be a fresh water tank under the floor too.

nestorpr 08-10-2006 07:44 PM

Re: first post!
 
I'm really interested in the whole engine setup, it may get me going for a little while until I can get a newer setup. Now I have to figure out when I can come up your way to get it. Where are you located? I'm in Miami.


All times are GMT -4. The time now is 03:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft