Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   Original Non-Skid (http://www.classicseacraft.com/community/showthread.php?t=22076)

77SceptreOB 10-11-2010 09:46 PM

Re: Original Non-Skid
 
I used Interlux brand - Compound "Intergrip" no skid compound. formula/model # 2398c. I got it at West Marine. It comes in a 8 oz can. Very pleased with the texture and durability, so far. Not too hard too clean either.

thehermit 10-11-2010 10:12 PM

Re: Original Non-Skid
 
Quote:

I used Interlux brand - Compound "Intergrip" no skid compound.

me too ;)

htillman 10-11-2010 10:31 PM

Re: Original Non-Skid
 
You can go to Shermin Williams Industrial coatings stores and get a plastic blue tape in different widths. I have used the 3M brand and their off brand with good results. If you want some non-skid send me a pm and I will send you some Interlux as I have a bunch left over. It goes along way - I used Signature Finish when I redid the decks on my 23.

Mahi54 10-11-2010 10:37 PM

Re: Original Non-Skid
 
Nice work Dave...looking forward to fishing with you on it next summers boys trip. Rob

Cheg 10-12-2010 02:18 PM

Re: Original Non-Skid
 
Are you happy with the results of signature finish on the floor?

htillman 10-12-2010 04:11 PM

Re: Original Non-Skid
 
Yes, I bought a can of white, took it and a hatch to the local Sherwin Williams paint store and matched it. Cannot tell a difference between the floor and the rest of the boat and it is holding up very well. I taped everything off, applied it heavily with a brush and then used one of Tom's special loop rollers to roll it out.

77SceptreOB 10-12-2010 06:32 PM

Re: Original Non-Skid
 
Quote:

Yes, I bought a can of white, took it and a hatch to the local Sherwin Williams paint store and matched it. Cannot tell a difference between the floor ....

Now that's a very good idea! I'll do that next time.

Blue_Heron 10-13-2010 07:01 PM

Re: Original Non-Skid
 
Quote:

Nice work Dave...looking forward to fishing with you on it next summers boys trip. Rob

Hey, Rob,
That makes twice now you've come out of lurker mode. If I've got any money left after Kay Kay's wedding next month, I may have it launched by next boy's trip. Progress is slow but steady.
Dave

Mahi54 10-14-2010 06:08 PM

Re: Original Non-Skid
 
Hey Dave,

Just admiring your work...Denny was telling me the other day that you posted a few new pictures. I had to take a look. I'm sure you will fiqure out how to finish in time and within budget for the summer trip...the challenge may be finding a vehicle to pull it down :)..I havent been yet but the snook are a pretty steady catch in the port the last few weeks. I hope to give it a try soon. take care Rob

basswacker 10-24-2010 10:16 AM

Re: Original Non-Skid
 
i need to do that. what kind of paint/nonskid ect. did you use


All times are GMT -4. The time now is 04:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft