Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   damp feet in an 18 (http://www.classicseacraft.com/community/showthread.php?t=22094)

gofastsandman 10-25-2010 07:56 PM

Re: damp feet in an 18
 
Marelon to the main stage. Bronze, you`re on standby. Scupper dances are now two for one. Don`t forget your hard working bartenders and waitresses.

Flex lines. No prob on slackers. Pull stern boxes and measure starboard deck drain Barbie {its stripper name} to port scupper and vice versa. That`s how it`s plumbed. Double clamps.

The idea is that when standing in a corner, the water won`t ingress up hill across the transom.

Cheers,
GFS

redsonfly 10-25-2010 09:27 PM

Re: damp feet in an 18
 
Between Barbie and Bronze, I think this will work! The single hose eliminates all possibility of leakage below decks. I was concerned of the crossover, where one hose goes over the other, but it'll work no problem. i will support the hoses in the expanse below decks, no wiggling permitted here!
Thank you GFSM!

CaptBoland 10-25-2010 11:54 PM

Re: damp feet in an 18
 
I've had the same problem in my 20ft. The ball scuppers work the best.

gofastsandman 10-26-2010 09:06 AM

Re: damp feet in an 18
 
Quote:

Between Barbie and Bronze, I think this will work! The single hose eliminates all possibility of leakage below decks. I was concerned of the crossover, where one hose goes over the other, but it'll work no problem. i will support the hoses in the expanse below decks, no wiggling permitted here!
Thank you GFSM!

Not my idea. Thank the genius that is Carl Moesly. Check out moeslyseacraft.com

Stainless scuppers are really pretty.

Cheers,
GFS


All times are GMT -4. The time now is 09:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft