Good to see you back Craig....:)

corner lids
 

No I never have still needs to find them or i am going to make them as a last resort.

I see the Pix on making your own thanks for sharing. I will give that try if i cant find some..

jim

rear Corner box Lids for Inboard
 

Thought i would take a last shot

Does anyone have the corner lids they arent using. Boat is almost done and I still need these lids.

jim

Mine were teak and I made new ones out of teak and epoxied 3/4 marine plywood to the bottom for more support .( same as original )

I have the factory ones on my boat. It will be up at hermco here pretty soon. Maybe he could make a mold of them. My boat also has the molded long center doors in between the two out doors. I am not sure how the boat was originally configured other then it was a I/O.
It was converted to a bracketed out board when I purchased it years ago. I always assumed the large engine box was removed at the rear of the cockpit and someone installed to large molded doors. It sure makes accessing the bildge easy but over the years they are starting to get a little flex to them. If you stand on the center of them.

corner box lids
 

thats great thanks for the offer. can you let me know when it goes there and i will give them a call..

thanks again
jim
732 996 3897