Classic SeaCraft Community - 1974 20 Ft CC SF transom

Page 2 of 2

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Performance (http://www.classicseacraft.com/community/forumdisplay.php?f=5)

- - 1974 20 Ft CC SF transom (http://www.classicseacraft.com/community/showthread.php?t=25103)

fly4navy

02-27-2013 11:53 PM

transom

The E-TEC 115 h.p. weighs in at 375 LBS.

Quote:

Originally Posted by fly4navy (Post 212783)

Thanks.....batts are already under the console and the oil reservoir will go where the batt used to be. Could move that forward also but probably not going to get much in return for that effort.

Appreciate the response!!!!!!

mrobertson

02-28-2013 10:00 PM

Hey Fly

My 89 20SF came with a 25" transom and is one of the few years that was rated for 225HP instead of 175.

I think you are going to be just fine with the etec. The only thing I can say is if you have plans to bracket or raise the transom you might want to buy a 25" engine and you could run it on a manual jack plate for now. Just a thought

Interested in your performance numbers

All times are GMT -4. The time now is 12:39 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page