Classic SeaCraft Community - who makes a good custom CC windshield

Page 2 of 3

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - who makes a good custom CC windshield (http://www.classicseacraft.com/community/showthread.php?t=25829)

TooFly

09-12-2013 09:02 PM

Quote:

Originally Posted by CHANCE1234 (Post 219876)

Thanks too fly. That's also what I would consider local. What's the best way to go about this as I don't have an old windshield I can take off and duplicate. Should I just trailer the boat to them and have them measure or should I do a drawing and measurements myself. Thanks.

I'd call Tony to ask. But he'd probably want to take measurements at his shop. I had him put a windshield on my first boat, with nothing to replicate, and it came out exactly as I wanted it.

Paul

TooFly

09-12-2013 09:04 PM

Wow. Nice work, thehermit!

CHANCE1234

09-12-2013 10:28 PM

Yeah, nice work, but not too confident in my abilities. What thickness plexi did you use for that?

Sceptre20

09-15-2013 09:14 AM

I made my own on the 23' that I had using 1/4 Lexan.I found the Lexan much easier to work with than Plexiglass.

thehermit

09-15-2013 06:39 PM

It was wicked easy. I think it was 3/8...but I would have to ck. I think the plastic cost me $80 bucks. Good luck ;)

CHANCE1234

09-15-2013 06:46 PM

Hmm, maybe ill have to experiment...

Don Ferguson

10-10-2013 09:41 AM

Hi. May I suggest Prospect Plastic in Pompano, Marcy Million is a contact there. They made two for me. $150 then. Furnished me with standoff buttons, etc. Don

Calibogue

10-14-2013 10:00 PM

What dimensions you looking for?

CHANCE1234

10-15-2013 11:57 AM

i'll have to check. I took about 8 inches out of the stock console and built up the top a little for electronics/gauges.

sidelock

10-19-2013 05:11 PM

Quote:

Originally Posted by thehermit (Post 219999)

It was wicked easy. I think it was 3/8...but I would have to ck. I think the plastic cost me $80 bucks. Good luck ;)

How does it look in the corners where you applied the heat to bend it, are there any bubbles or is there any difference in clarity of the lexan ?

All times are GMT -4. The time now is 05:51 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page