Guess I need to start a wants thread.

Are you going to LP?

I spend a lot of time searching Moesly hulls but I never seem to find many.

Hey Brian...not that I need another boat...but I sure do like the 27 pictured. Where is that one located?

Looks like a fantastic boat. Any ideas how thick the transom is to adequately support the bracket and twins? I'm in the middle of replacing the transom on a 27' and can only get 1.5" of marine ply between the inside of the skin and the stringers. I could add additional thickness above the stringers (where the bracket bolts) or add some additional sheets and just template it around the stringers another inch or so if needed. Not too many 27' with a bracket to find advice.

Most people cut the stringers back a bit then tab them back in once the ply is in place.

The boat is located north of Tampa. I inspected it and went for a ride. Very close to purchasing it, but the etecs poped up , which is what I wanted and rare to find a used pair.
The Fella who owns it also owns a 23. I looked atthe boat before he owned it, it was up in Deltona florida, had a chance to purchase it for $15K but passed.
The fella who owns it now has spent a tremendous amount of money on it, 6K into the motors, re cored the gunnels, topside, etc.
Sorry for the late response stupid busy making $$.