Classic SeaCraft Community - Hermco Bracket with 30" Motor

Page 2 of 2

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - Hermco Bracket with 30" Motor (http://www.classicseacraft.com/community/showthread.php?t=28563)

kmoose

03-05-2017 08:13 AM

Thanks Cory, please let us know how it comes out when you run it.

cRaZy8

03-26-2017 01:26 PM

Launched mine this past week.

Engine is mounted hole #2.
Swinging a Quicksilver Q4 prop, Solas Rubex hub, 19" pitch.
Turned 5800RPM, 41 knots and climbing when I pulled it back.
I used to get 44 knots top end at 6000RPM.
Its got more in it, I just ran out of room.

Time to plane is much quicker as well.
I didnt touch the tabs to get her on plane.

kmoose

03-27-2017 03:19 PM

Thanks for the follow up Cory. Was the second from the bottom or the top of the engine bracket. Pictures would be great if you don't mind.

All times are GMT -4. The time now is 04:44 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page