Picking away... Coosa bulkheads. Fore to aft... integral freshwater tank +/-16 gal, 55 gal fuel tank, natural free-flowing livewell about 30 gal, and monster bilge.

https://c1.staticflickr.com/5/4273/3...6018936a_b.jpgUntitled by dirtwheelsfl, on Flickr

Glass pads to fasten tank to on the ends, i hate foam

https://c1.staticflickr.com/5/4262/3...fd7650d8_b.jpgUntitled by dirtwheelsfl, on Flickr

Freshwater tank, will get coated before gluing/tabbing lid on

https://c1.staticflickr.com/5/4198/3...fc43dfba_b.jpgUntitled by dirtwheelsfl, on Flickr

https://c1.staticflickr.com/5/4282/3...0edc07ce_b.jpgUntitled by dirtwheelsfl, on Flickr

https://c1.staticflickr.com/5/4244/3...134593e3_b.jpgUntitled by dirtwheelsfl, on Flickr

And a lil motORvation!

https://c1.staticflickr.com/5/4267/3...f5e43c7d_b.jpgUntitled by dirtwheelsfl, on Flickr

Nice motivation!

My, my....this is coming along very nicely!! Good pick on the engine, should be perfect! :)

Corecell party

https://farm5.staticflickr.com/4212/...f926d122_b.jpgUntitled by dirtwheelsfl, on Flickr

Gutters lead to a not-designed-yet splashwell

https://farm5.staticflickr.com/4279/...e4099dff_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4050/...958e214f_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4288/...d4d3aba2_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4311/...08d3ce38_b.jpgUntitled by dirtwheelsfl, on Flickr

3" rigging tubes. (Factory stringers are off by as much as 2" side to side which made it a pain to get em "symmetrical")

https://farm5.staticflickr.com/4294/...0d398151_b.jpgUntitled by dirtwheelsfl, on Flickr

Floating oil tank base. Sloped a tad to shed water...

https://farm5.staticflickr.com/4327/...7a26722c_b.jpgUntitled by dirtwheelsfl, on Flickr

Bottom

https://farm5.staticflickr.com/4289/...3f177cef_b.jpgUntitled by dirtwheelsfl, on Flickr

Top. with solid glass pads to tap leaning post into

https://farm5.staticflickr.com/4320/...2d91b7f1_b.jpgUntitled by dirtwheelsfl, on Flickr

Still figuring out fuel tank...

All i can say is DO NOT use "Best American Welding" in Vero Beach for anything....

Looks like some pretty great progress.

You may want to consider electrical sweeps instead of the elbow 90's !

Unless you are using all fly by wire controls etc..

Just my 2¢ worth !

Nice job you are doing for sure...:cool:

I just came across this thread. Looks like nice clean glass work and a quality build.
Dave

Thanks guys.

Pic kinda makes the elbows look squatty, theyre streets. My homie depot doesnt carry 3" gray stuff for whatever reason? Shouldnt phase teleflex extremes... not a fan of the tactile-ness ( or lack of) on the electronic stuff just yet

Dry fit

https://farm5.staticflickr.com/4347/...482348f9_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4339/...cfb2fa17_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4381/...69e406e6_b.jpgUntitled by dirtwheelsfl, on Flickr

Console is just a jig for the one i will build. Pretty close to the 18'er console but with a few tweaks. Mainly a bigger flat between helm panel and electronics face to fit beers! And an extension on the sides with a flat for rod holders, fuel/water fills, and a place to put feet when stting on leaning post

https://farm5.staticflickr.com/4379/...d1e7f9be_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4428/...465a2d1c_b.jpgUntitled by dirtwheelsfl, on Flickr

Looking great! You do very nice work.

I love the clamps!

Lloyd