Classic SeaCraft Community - Gas tank fluid removal

Page 2 of 2

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - Gas tank fluid removal (http://www.classicseacraft.com/community/showthread.php?t=29425)

Old'sCool

06-08-2018 04:25 AM

Quote:

Originally Posted by uncleboo (Post 258471)

Or you could get a measurement through the filler inspection plate and cut a new one over the sender. I did this for a plate to access the pick up fitting when replacing the fuel lines. Used a mirror and a flashlight to see the fitting so I could see when the end of the tape was at the fitting.

I did the same on my 23' with clear lid to easily view the fill/vent area on the tank.

cudabob

06-17-2018 10:06 PM

Hi got old fuel out of the tank. Has anyone replaced this tank with a generic moeller tank? about 50 gallons.
old tank is 8" deep and 22 " wide

All times are GMT -4. The time now is 12:16 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page