Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   23 Seacraft Repower question (http://www.classicseacraft.com/community/showthread.php?t=30430)

kmoose 08-02-2020 09:38 PM

Quote:

Originally Posted by RoomToMove (Post 268728)
I have a 300 G1 Etec haning on a notched transom 23, 30" shaft. Boat sits really nicely and handles like a dream!

The absolute best transom option for a CC and likely any Sceptre/Tsunami as well.

Gaffer 08-09-2020 04:08 PM

Update
 
Found a 2006 F250 with 650 hours and had it hung last week. I picked up the boat on Wednesday. Mechanic did a great job hanging the engine and rigging controls etc

I am very happy with the motor. At 4400 rpm I am seeing 31mph with a burn rate of 3 mpg. Tops out around 5900/6000rpm although I don’t ever see myself running it that fast. 4-4500 rpm is the sweet spot

No noticeable difference in performance vs the 250 ox66. Maybe not quite as much torque in the low end but that is more than made up by the quiet and smoke free benefits of the 4 stroke.

Boat sits a touch lower but nothing that is of any concern

Thanks again everyone for the advice and feedback on engine selection


All times are GMT -4. The time now is 09:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft