![]() |
Re: Bracket tub shape opinions
I honestly don't know the specifics on it.
You will have to call Bobby. He had it made for me and it wasn't as wide as the Armstrong so I had Mike at Wildfire order me a wide body. May be worth a look. Donnie |
Re: Bracket tub shape opinions
I'm about 4.5 inches up from the keel. There is minimal spray coming from the anticav plate.I will check to see were the anticav plate sits in relation to the surface while running next time out.
http://www.casdvm.com/photos/DSCN5627.JPG http://www.casdvm.com/photos/DSCN5625.JPG strick |
Re: Bracket tub shape opinions
10-4 :D
|
Re: Bracket tub shape opinions
HEY WART IF YOU TAKE YOUR BRACKET OFF YOU GONNA SELL IT ?
RUSTY |
Re: Bracket tub shape opinions
Yes.
|
Re: Bracket tub shape opinions
I like the "no wrench" drain plug!!
|
Re: Bracket tub shape opinions
Quote:
strick |
Re: Bracket tub shape opinions
I understand that!! Not to derail the thread but, how is the hole sealed at the garboard drain....for those that have replaced their own transoms?? Any pics of the install/repair??
|
Re: Bracket tub shape opinions
What I do is drill a hole to the right size first. Then I use epoxy to seal around the inside of the hole. Then one of these guys gets 5200 in place. I usually have to cut them to the right length then tap them in from the inside the boat so the drain plug fits into it as shown. The drain plug usually gets 5200 as well. Thats just how I do it.
http://www.casdvm.com/photos/DSCN3916.JPG strick |
Re: Bracket tub shape opinions
That looks as right as it gets!! Nice job!
|
All times are GMT -4. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft