![]() |
Re: whats your Top End on 23s
Is that transom mount or bracket??
|
Re: whats your Top End on 23s
Quote:
|
Re: whats your Top End on 23s
reelescape1 - if you are referring to my post I am running a D&D bracket...
|
Re: whats your Top End on 23s
Quote:
|
Re: whats your Top End on 23s
My 20' has the 150 merc, and runs about 38 tops. I thought this was a little sluggish. No?
I was thinking of changing the carbs out and making it 200 hp. But then I would burn gas even more! |
Re: whats your Top End on 23s
If you have a 150, and are running 38 mph, you're doin' okay. The 150 and the 200 are different blocks in most years. You can upgrade a 150 to 175 by changing a few parts and making a few adjustments, but you can't just change the carbs and get 200 hp. I have a 150 xR4 motor that was remanufactured with a variety of parts to make it better, and I was thrilled to get 190 hp. My Seafari 20' will top out at in the high 40's even loaded for fishing.
I have decided my next motor (2 years to go and counting) will require a transom modification like a flotation bracket, and will be a 4-stroke 250 hp Suzuki. I have put my bartered deposit down on a left-over 2006 from a local boat mfg., and will be paying it off over the next 2 years. It will cost me $8100 including controls. |
Re: whats your Top End on 23s
:eek:, expensive! But worth it~
Ok, so lets say 175. Would that take a beatign on my gas tank...or just really improve my performance...or neither? Ive topped 35-36 knots. Thats actually 40-42 mph! My bad on the 38. I guess Im happy with the speed but I like to have plenty of power..... :cool: |
Re: whats your Top End on 23s
expensive! But worth it~
Ok, so lets say 175. Would that take a beatign on my gas tank...or just really improve my performance...or neither? Ive topped 35-36 knots. Thats actually 40-42 mph! My bad on the 38. I guess Im happy with the speed but I like to have plenty of power..... |
Re: whats your Top End on 23s
1989 23WA w/89 Merc 200, low 40's. Test sheet when I bought it said 44 MPH running 14 1/2X 17 Alum prop. I am running 14 1/2 X 17 stainless Merc/w slight cup and am getting about the same results. Don't run WOT @ current gas prices. Cruise @ 4200 rpm @ 32 mph on rippled water.
|
All times are GMT -4. The time now is 07:21 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft