Re: 25 seafari
 

Yo Brother
That boat was at Charlton Towing Service?????
Stoped and asked if it was for sale but they said they only towed for the owner. :D

Re: 25 seafari
 

rod man that is the one nice rig just need a lot of work ! i have to get my self in gear thanks george

Re: 25 seafari
 

i took a couple pictures of our progress, we need to replace the transom! lots of work ahead of me. I need a good glassman! PLEASE HELP!
thanks George.

[image]http://i1231.photobucket.com/albums/...Victor/174.jpg[/image] [image]http://i1231.photobucket.com/albums/...Victor/173.jpg[/image] [image]http://i1231.photobucket.com/albums/...Victor/168.jpg[/image] [image]http://i1231.photobucket.com/albums/...ctor/157-1.jpg[/image] [image]http://i1231.photobucket.com/albums/...ctor/148-1.jpg[/image]

Re: 25 seafari
 

its been to cold! and a to much work. hope to get going next week? thanks george

Re: 25 seafari
 

need help getting to have transom done. have a glass man but i dont know what to ask him? what should i use? need a plan for transom cap have room to make the boxes bigger than they are. going to do transom from inside any advice will be a big help thanks george

Re: 25 seafari
 

Most professional glass guys will tell you it's generally easier to do it from the outside . . . just leave a few inches of the old transom surface all the way around the edge to provide a reference for fairing the new skin to.

Re: 25 seafari
 

thanks but i need some work on stringers too.george

Re: 25 seafari
 

What's wrong with the stringers, George? They're hollow fiberglass, so rotten wood isn't an issue.
Dave

Re: 25 seafari
 

dave someone drilled some holes in them i dont think they are all drains one has a piece of 3/4 pvc sticking out of the top. thanks need all info i can get george

Re: 25 seafari
 

Ok, I see the pvc in the port stringer in one of your pics. Where's the other end of the pvc?

Have you pulled your fuel tanks? If so, how do the bulkheads and stringers look?