Very nice glass work!

FYI - cutting out the inner liner between gunnel and floor removes a LOT of torsional stiffness from Moesly's original design! If you installed some 1/2 balsa core on the hull sides, that would significantly stiffen the hull without much of a weight increase!

Still not sure what im gonna do there just yet... The side boxes will be replicated up forward, along with an anchor area bulkhead. Will probably bag some 1/4" foam to the hullsides aft of the boxes. I like a nice flat hullside with no knees or stiffeners

https://farm5.staticflickr.com/4258/...1081c912_b.jpgUntitled by dirtwheelsfl, on Flickr

Damn... that is finish work galaxies beyond my pay grade. Very nice!

Yep got a couple hours in that one! Squid Lips will be just fair enough to keep clean easily.. Classy workboat finish :)

Thats a couple of light years past any workboat I've been on and well past plain old classy.
I would love a little info on exactly how you did that.
Please.

Lots of hand blocking before the cap went back on. Along with various power tools to get it close enough to block. Tabbing placement can save alot of headache too. L&H handled the priming and painting after i faired it.

Friend/client of mines boat, im definitely not going to put in the same time on mine. I dont think sealife and women care haha Ride em hard n put em up wet!

Tank saga: Etched, converted and coated. Now im not one to badmouth people, but stay clear of "Best American Welding" in Vero Beach. Ended up having an old friend of mine do it. Havent seen him in years and didnt know he was in the welding biz, but he does excellent work. In Stuart if anyone needs a tank done. Also you can see how off center the stringers were from the factory on the mounting tabs on the tank. Lots of Tefgel and nylon washers there

https://farm5.staticflickr.com/4409/...60f8cd25_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4366/...5d7676e3_b.jpgUntitled by dirtwheelsfl, on Flickr

Double NON perforated clamps and chafe guards. Boat will get redone by the time these fail

https://farm5.staticflickr.com/4431/...4b2b19f5_b.jpgUntitled by dirtwheelsfl, on Flickr

Sandy was here to witness the sole going in for good. Lookn like someting now!

https://farm5.staticflickr.com/4431/...15f41ce5_b.jpgUntitled by dirtwheelsfl, on Flickr

Bunch of random pics. Cap almost ready to go back on after a fairing party. It got cored and widened to 7 1/2" in the rear... Need to take more pics of it

https://farm5.staticflickr.com/4463/...b9b8e239_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4492/...597fe854_b.jpg by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4489/...e7819011_b.jpgUntitled by dirtwheelsfl, on Flickr

Deck got tabbed in with a 12oz, then another whole layer of 1603 incorporating tabs over the whole thing. (has 2- 1700s and a 1603 on top. My friends like to drop stuff)

https://farm5.staticflickr.com/4491/...590358c9_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4458/...f3be9452_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4496/...38b47f5a_b.jpgUntitled by dirtwheelsfl, on Flickr

New boxes.

https://farm5.staticflickr.com/4454/...3b9b8619_b.jpgUntitled by dirtwheelsfl, on Flickr

Dado'ed and PVC glued then glassed. Bottom part of dado got ground flush and rounded over after

https://farm5.staticflickr.com/4513/...bf2e58aa_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4460/...d3039d43_b.jpgUntitled by dirtwheelsfl, on Flickr

Console is a mix of offcut cores from other things

https://farm5.staticflickr.com/4453/...237411f6_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4498/...2068f9f3_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4507/...29e888b8_b.jpgUntitled by dirtwheelsfl, on Flickr

Gutter and splashwell drains. Been talk of a shroud too (coosa blocks for hinges)

https://farm5.staticflickr.com/4555/...26e9362d_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4543/...13b12b54_b.jpgUntitled by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4534/...5807a828_b.jpgUntitled by dirtwheelsfl, on Flickr

Towing eye. Sleeved with sched 80 PVC pipe

https://farm5.staticflickr.com/4470/...7d8773bd_b.jpgUntitled by dirtwheelsfl, on Flickr

Open bulkhead and some anchor hangers. (need to notch em still)

https://farm5.staticflickr.com/4548/...75cbdbbd_b.jpgUntitled by dirtwheelsfl, on Flickr

3/8 divinycell bagged and glassed with a 22oz triax

https://farm5.staticflickr.com/4530/...e7227d29_b.jpg by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4545/...9284b13b_b.jpg by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4550/...f5d245c7_b.jpg by dirtwheelsfl, on Flickr

https://farm5.staticflickr.com/4528/...550f4dbe_b.jpg by dirtwheelsfl, on Flickr

Damn.....Holy nice work Batman!!!!! :)