|
Looking good!
|
10 Attachment(s)
Progress three
had a little trouble with the gelling the hull. the previous owner had sanded the hull in some areas down past a layer of grey primer. unfortunately, after sanding the orange peel the gray was shadowing through. bought 5 gallons of FLY gel coat and plane on regelling the hull with 2 gallons, the bottom of the hull with 2 gallons and gelling the bottom of the t top with that last of it. a engine hoist was use to raise the boat off of the bunks. worked well. dont try at home. you can also see some "fixes" the old owner attempted. pretty made stuff. Attachment 20088 Attachment 20089 Attachment 20090 Attachment 20091 Attachment 20092 Attachment 20093 Attachment 20094 Attachment 20095 Attachment 20096 Attachment 20097 |
10 Attachment(s)
progress 4
ended up grinding out the pool of thickened polyester for the delamination on the bow. decided to fill with 1708 + three layers of mat. Attachment 20098 Attachment 20099 Attachment 20100 Attachment 20101 Attachment 20102 Attachment 20103 Attachment 20104 Attachment 20105 Attachment 20106 Attachment 20107 |
9 Attachment(s)
progress 5
should have boat all gelled and sanded this weekend. Attachment 20108 Attachment 20109 Attachment 20110 Attachment 20111 Attachment 20112 Attachment 20113 Attachment 20114 Attachment 20115 Attachment 20116 |
progress 6
10 Attachment(s)
|
Up to the top wondering how’s this project coming along.
Strick |
| All times are GMT -4. The time now is 09:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft