Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   Side vs Rear Scuppers (http://www.classicseacraft.com/community/showthread.php?t=30541)

JBASS02 11-03-2020 12:09 PM

1 Attachment(s)
I'm thinking something like this (with a clam shell on the outside). Simple and clean.

kmoose 11-03-2020 12:46 PM

That's what you want but I would have them near the corner. Also, size is critical and they don't need to be as big as you would think. Get the smallest clam shell and work from there. Also, understand my deck has been raised and my deck is sealed. Even so, 3 adults can stand on one side in the back with no water coming in.

I will also note that I water tested my location first with the boat loaded before I cut them. You need a solid 4" above the waterline with the boat fully loaded and level.

No grave but the Seacraft 11-03-2020 07:26 PM

Thanks Kmoose, that cleared up all of my questions and concerns. Gotta love this site!

dirtwheelsfl 11-05-2020 02:23 PM

Put these in a bertram, 1.5 x6". Covers are about to go on... I like round ones so u can plug em though.

https://live.staticflickr.com/65535/...ae19cd57_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...03d20b2b_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...a5709567_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...00fafeae_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...358f1aac_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...1f825bd6_c.jpgUntitled by dirtwheelsfl, on Flickr

https://live.staticflickr.com/65535/...82ba09e1_c.jpgUntitled by dirtwheelsfl, on Flickr

kmoose 11-13-2020 08:08 AM

Nice covers Dirt! I should have commissioned you to build some covers for mine. Nobody out there makes any like that or that nice.

JBASS02 11-13-2020 12:55 PM

Dirt, How did you attach those? Also what is the point of doing a large pill shaped opening if the flow is restricted to a small opening at the rear of the clam cover? I was planning to do the pill shape but maybe I'll do the round like your boat.

dirtwheelsfl 11-13-2020 02:23 PM

They arent on there yet, i will just epoxy em on. Theyll only cover about 2/3 of the opening so will still flow plenty. They just keep water from coming in when in forward and pitching side to side. Reverse kinda SOL...

I like round so i can plug em


All times are GMT -4. The time now is 03:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft