Classic SeaCraft Community
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)
-   -   23 sCCeptre (http://www.classicseacraft.com/community/showthread.php?t=30605)

Boonie23 02-19-2021 09:55 PM
Quote:
Originally Posted by kmoose (Post 270761)
I know everybody seems to be reluctant to transom R&R from the outside but I think you get a much better result. Trying to save a 40+ year old outer skin with 50 patched holes in it is not a great foundation to start with IMHO.
What do you guys do about the HIN when you do the transom from the outside? Owner before me did mine from the outside but left the top right corner of the outer skin to save the HIN. Can I cut it off and have someone restamp the transom? My first build so thanks in advance.

dirtwheelsfl 02-19-2021 10:47 PM
Quote:
Originally Posted by Boonie23 (Post 270835)
What do you guys do about the HIN when you do the transom from the outside? Owner before me did mine from the outside but left the top right corner of the outer skin to save the HIN. Can I cut it off and have someone restamp the transom? My first build so thanks in advance.
I use an engraver between the primer and paint stages...

Boonie23 02-19-2021 11:00 PM
Quote:
Originally Posted by dirtwheelsfl (Post 270836)
I use an engraver between the primer and paint stages...
Ah great thank you for the help!

dginge 02-28-2021 12:00 AM
Very true. Start clean.



Quote:
Originally Posted by kmoose (Post 270761)
I know everybody seems to be reluctant to transom R&R from the outside but I think you get a much better result. Trying to save a 40+ year old outer skin with 50 patched holes in it is not a great foundation to start with IMHO.

dirtwheelsfl 03-19-2021 09:45 PM
5 Attachment(s)
Photo dump to catch up to speed... IF ANYONE KNOWS HOW TO ROTATE PICS, IM ALL EARS!!

Kinda hard to tell what going on but had to grind a bunch of blisters out from under the wet stringers. Added a couple 1700s

dirtwheelsfl 03-19-2021 09:52 PM
6 Attachment(s)
Bulkheads/water tank and fishbox...

dirtwheelsfl 03-19-2021 09:59 PM
5 Attachment(s)
Stringers in, will get capped when i figure out where any notches need to go in... 2" h80 w 4x1700 each side. Ran out on the end so had to puzzle piece some 1" corecell in...

steel686 03-19-2021 11:17 PM
Top of iPhone from 12 o’clock to 9 o’clock worked for me. Looks great as usual.

TMala 03-20-2021 09:33 AM
Looking great! Im following along closely always a lot to learn!

strick 03-20-2021 07:47 PM
I can rotate them but they might be out of order..have to down load to my computer then re up load to the site...this seems to be a problem with phone up loads..Nice work as usual and enjoy your clean refurbs.

strick


All times are GMT -4. The time now is 11:13 PM.
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft