Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hulls!!
 

Capt. Chuck,

Way to Go!!! Can we have them a little larger say 6 to 8 inches. I plan to use only this as the description on my 75 SeaCraft?

Juan

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hulls!!
 

Trayder,

I see from your picture of your boat that you closed in the motor well, do you have any pictures of how it looks on a close up. I want to do the same to my 1975 20ft. open.

Juan

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hull
 

I believe Mr. Moesly is sitll in Stuart, Fl., where he had a 27' SC re-built...maybe he can provide an old logo...I would buy one! - aaf

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hulls!!
 

This is a scan of the first "Prototype" HDS Decal hot off the press today. It has the corrected lifting strakes and VD Lines [img]/images/graemlins/ooo.gif[/img] The finished product will look real nice!

http://img34.photobucket.com/albums/...ototypeHDS.jpg

aaf-- Maybe "You" and "Pipedreams" can design one! It will cost too much for set up to make just a couple. I have close to $400 into the Potter Builts already. [img]/images/graemlins/frown.gif[/img]

Flagtails - I think I could get them made larger but then you might run into a "Trademark" violation. We had these designed and priced at the 3"x3" size. I am getting a quote on a larger one placed on a white metal license plate for your vehicle. The Red/Gold/Black will really standout and look dynamite [img]/images/graemlins/cool.gif[/img] I'll post it & cost when it's done. [img]/images/graemlins/wink.gif[/img]

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hull
 

License plates,
now theres a good idea too. Maybe we can get the classic SeaCraft.com on the bottom or somthing?
[img]/images/graemlins/wink.gif[/img]

Great Logo!
 

Capt Chuck-

Thanks a lot! Now I have to dump my CSY for a Potter or I get left out.... Just like playing kickball when I was eight! [img]/images/graemlins/grin.gif[/img]

-Hooper

PS - Those decals look awesome!

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hull
 

aaf

Believe it or not, we had a neighborhood block party in December and the people who live two doors down told me that they were real close friends with Carl Moesly and they would introduce him to me someday [img]/images/graemlins/cool.gif[/img]

I wonder if he has seen the CSC site? [img]/images/graemlins/ooo.gif[/img]

Re: \"\"\"ATTENTION all owners of \"POTTER BUILT\" hulls!!
 

Classic Potter Built HDS Update!!!


Over 100 stickers have been ordered. They will be off the press on Tuesday and I will be shipping them through out the week [img]/images/graemlins/cool.gif[/img]

Those of you that have already paid should have them by Friday if the USPS gets off their azz. [img]/images/graemlins/grin.gif[/img] Those of you that have Potter Built hulls (I know who your are) and have not paid or have not ordered yours yet [img]/images/graemlins/blush.gif[/img] you guys need to get off yours and get with the program...You don't want to be the only one without it do you [img]/images/graemlins/confused.gif[/img]

BTW: Once you get your HDS mounted on your boat, trailer, automobile or wherever, How about posting a a cool picture on this thread for everone to see!!! [img]/images/graemlins/smile.gif[/img]

\" Classic Potter Built\" HDS Have Been Shipped!
 

The Classic SeaCraft Potter Built Hull Designation Stickers have been shipped to all CSC members who placed orders [img]/images/graemlins/cool.gif[/img]

Be sure to post a picture of your Classic Seacraft after putting on your HDS!!! [img]/images/graemlins/wink.gif[/img]

It is very easy to do. Just like a woman, be gentle and slow during placement [img]/images/graemlins/grin.gif[/img] TAKE YOUR TIME , as the lettering is small. I have included (4) easy "How Too" steps [img]/images/graemlins/ooo.gif[/img]

STEP #1 Make sure the surface is clean and with masking tape over the top and place your sticker at a desired location.
http://img34.photobucket.com/albums/...back/step1.jpg
STEP #2 Lift the sticker up from the bottom and "GENTLY" peel off the backing paper
http://img34.photobucket.com/albums/...back/step2.jpg
STEP #3 Using a rubber squeegie or a Credit Card, rubb the sticker in place with easy strokes.
http://img34.photobucket.com/albums/...back/step3.jpg
STEP #4 Slowly peel the masking tape and the sticker mounting paper off at an angle.

You now have your HDS mounted!!!! [img]/images/graemlins/shocked.gif[/img]
http://img34.photobucket.com/albums/...ersticker2.jpg

For those of you wishing a matching dynamite "Classic SeaCraft Potter Built license plate for your vehicle, they also are now available!!!! [img]/images/graemlins/laugh.gif[/img] Made with the same Marine Grade Vinyl Lettering. A 5"x5" HDS mounted on a metal license plate!
$18 includes a plate with your choice of years and USPS Priority Shipping. Orders taken via an eMail too me [img]/images/graemlins/wink.gif[/img]
http://img34.photobucket.com/albums/...ack/plate1.jpg
I want to personally say """ http://img34.photobucket.com/albums/...ack/thanks.gif""" to everyone who has supported the CSC Web site with the purchase of the HDS decals. Remember I make "NO" profit on these stickers and for each HDS sticker sold a $1.00 goes to support the CSC Web site we all enjoy! [img]/images/graemlins/wink.gif[/img]
Capt Chuck

Re: \" Classic Potter Built\" HDS Have Been Shipped!
 

They look even better than I thought they would Capn Chuck!!!!Thanx for the instruction pix to- since my boat is in the water and will have to follow the steps "upside" down do you have any theories that may help me with this most difficult project???

Thanx again to you for all your work- great job!! craig