Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   1973 Tsunami to Center Console Conversion (http://www.classicseacraft.com/community/showthread.php?t=24173)

kneedeep 06-30-2012 08:06 PM

j looking good so far. i used a mold release paste wax on the pvc. is the plywood a temp mold or is it your core? i was able to add a support made out of starboard under the cap where the old console was at the top of the vent box.

jgrisham 06-30-2012 08:45 PM

3 Attachment(s)
Well, I picked up some 3" wide packing tape and coated the pvc boards with that. Laminated up 2 woven and 3 3oz csm. The mold popped right off and NO release agent cleanup! I started doing the backside.

Here's a question: Is CSM significantly weaker than an oriented cloth? I have a pretty big roll of CSM someone gave me that I'd like to use up. I'm all out of woven :(

jgrisham 06-30-2012 08:53 PM

Kneedeep, just thinking about the support. Did you stack the starboard horizontally, like a thick shim on top of the vents? Thanks

kneedeep 07-01-2012 11:39 AM

2 Attachment(s)
here's a pic of the supports. on the front vent box you can put them on both sides. dam i need to start washing under the cap.

jgrisham 07-04-2012 10:29 PM

That support is easy enough. I'm looking to order some fairing compound, what would be suitable. I'm thinking i'm gonna gelcoat instead of paint. Quickfair sounds awesome but I'm not sure how gelcoat will play with it.

kneedeep 09-08-2012 10:40 PM

any updates on your project

Brooks Reid 05-04-2013 07:45 AM

Did you guys ever finish the projects?
 
Just wondering if you ever finished the conversion of the Sceptre to CC?


All times are GMT -4. The time now is 03:58 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft