![]() |
Re: 1967 SeaMaster 27 ft-More Pictures
Sandy, Sometimes I wonder if you are an offspring
of Gene Wilder... :eek: :rolleyes: :D You just amaze me!! :cool: That may have been you in Willy Wonka and the Chocolate Factory?? http://i7.photobucket.com/albums/y273/krn54/Willy.jpg See ya, Ken |
Re: 1967 SeaMaster 27 ft-More Pictures
Quote:
I`d like to thank the psychiatrist who declined to give me Ritalin and other sundry goodies as a child. Thanks Doc! GFS I always wanted to be an Oommpa Loompa on Halloween. I was a salad bar once. |
Re: 1967 SeaMaster 27 ft-More Pictures
Quote:
By any chance, was that the fruit salad bar down next to Kelly's on RB? :rolleyes: :rolleyes: :rolleyes: :D Just kidding! |
Re: 1967 SeaMaster 27 ft-More Pictures
Quote:
We fed the whole dance floor and then the ice starting melting. |
Re: 1967 SeaMaster 27 ft-More Pictures
Quote:
Your words about the family are most opportune. Before my seacraft, I had a 26 foot Silverton and must say, that as far as a family went and more than a couple of friends on board it was a great configuration. I say this because it was virtually identical to your dad's boat in terms of its configuration; bridge up top, forward V berth, convertible dinette, standup head and a small galley. All this and still an 85 square foot or more cockpit! It didn't matter whether we were fishing, in our own bed in another harbor, a picnic on the beach someplace or just about anything else we wanted to do with it! It was always dry for those who wanted to stay dry and generally pretty cheerful in its sun drenched cabin. All the drawbacks of that Silverton are nonexistent in the Seacraft. It has a much softer and faster hull design. It is more efficient in terms of fuel consumption and it is much better built. If I wasn't looking for a job and had the money, I'd be down to buy that boat in a heartbeat. If someone here either is or knows someone who has a younger family and wants to make a lot of memories with that family and still have a great fishing boat to boot, they would be doing them selves service to check that boat of your Dad's out. Just my story, and I'm sticking to it! |
Re: 1967 SeaMaster 27 ft-More Pictures
BigLew,
Nice post....thank you. Now hurry up and find that perfect job so you can be the lucky guy who takes this boat home! |
Re: 1967 SeaMaster 27 ft-More Pictures
Quote:
|
Re: 1967 SeaMaster 27 ft-More Pictures
OR.....the best, and safest option is to go with a diesel generator like a Phasor 3.5kw. All you have to do is install a poly fuel tank, about 15 gallons, a muffler system and a raw water pump for the heat exchanger. I've done it on a 32' gas inboard Silverton and it powers everything no problem. Did I mention safety????
|
Re: 1967 SeaMaster 27 ft-More Pictures
Don,
You are exactly right. For safety's sake, diesel is the way to go. My only thought was that those engines are mixed (oil & gas) on board and that there is a ready source of non-mixed gas already on board. But I agree the diesel is the safer option. Again, the hull should be adequately vented in either case! |
Re: 1967 SeaMaster 27 ft-More Pictures
Very true, however this particular 27' SeaCraft is an outboard(s) on a bracket which makes it much safer. You only have a 3/8" fuel line going to the engines versus an inboard or I/O that has all kinds of fittings, carbs, filters, etc. in an enclosed space. Oh yes I agree, well vented with top of the line blowers. I have seen an inboard gas boat blow up and burn to the water line.....not pretty!
|
All times are GMT -4. The time now is 07:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft