Classic SeaCraft Community - 20 Master Angler Bracket ?

Page 6 of 6

« First

Show 40 post(s) from this thread on one page

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)

- Recovered Threads (http://www.classicseacraft.com/community/forumdisplay.php?f=13)

- - 20 Master Angler Bracket ? (http://www.classicseacraft.com/community/showthread.php?t=25982)

tuckerman

02-23-2014 07:44 PM

1 Attachment(s)

3/4" plywood bonded to stringers

tuckerman

02-23-2014 07:49 PM

1 Attachment(s)

Foam everywhere but fuel tank and bilge area. outside of stringers and area between tank and bilge foamed .

tuckerman

02-23-2014 07:51 PM

1 Attachment(s)

Fuel tank box stretched to 73"

tuckerman

02-23-2014 07:56 PM

1 Attachment(s)

glassed floor today as you can see owner decided no bracket

tuckerman

02-23-2014 08:03 PM

1 Attachment(s)

A rough mock up of the console and livewell design. Going to hold about 30-40 gal , partially tucked under console. Two overboard drains midship one on each side.

Bryan A.

02-24-2014 09:16 AM

Looks good, hurry up and finish!!!!:D

tuckerman

03-13-2014 01:04 PM

1 Attachment(s)

Spray poly on inside. Ready for cap to be put on.

Bryan A.

03-14-2014 09:17 AM

Looks good, start the console yet?

All times are GMT -4. The time now is 05:52 PM.

Page 6 of 6

« First

Show 40 post(s) from this thread on one page