I used the Arjay and don't remember the exact amount, we did my brother's transom at the same time and we bought a lot. Send Skipper a PM on the seacast product. Hang on....I do remember using the volume formula on the web site and added 10% and it worked perfect. If you use either, rule #1, no leaks!

Well some progress today. Poured flotation foam. Some spots I went over but a little trimming and it's done. I did not put foam where the rod holders and other things will go so I don't have to dig out the foam while upside down. Painted the anchor locker and bilge since it easy to get to now. Picked up 2 buckets of Arjay pour transom bu am short one more bucket....Monday... Was able to pick up a free leaning post....just needs the rod holders and cushions. But it was free.

Wish the rain would stop.

Glass ing and grinding. ....does it get any better?

Yep when it ends

Poured the transom today. Was a little short so I need to pick up another 5 gallon pail. Easy to use poured easily and except for a overlooked screw hole all went well

Well the new year begins and it's time to make a Huge push and get the boat closer . The transom is poured and will be trimming it to 26 1/4 . Reattach the top to the hull . Decided to close the 2 rear ventilation vents on both sides. I like the look better. Begin looking for the new console. I like the one someone used on theirs from a pathfinder. Do a final prep and sand and get her painted. Then the real money is to be spent. In no particular order trailer hydraulic steering trim tabs rub rail electronics t-top wiring. Damm I need to break out another thousand. ...LOL

Slow progress due to work. But a little work done this weekend . I sealed up the side vents. I really didn't like the look to begin with.

transom was done today cut it to 26 1/2 . got dark so no pictures .

will be wrapping it up in the next few days and fairing it. the top gunnel will be next to go on a little (no who am I kidding) sanding and off to get painted. It may be a late summer boat.

Even the Admiral came out and was pushing me to get'er done

And it's sitting on the trailer too

Needs another layer of glass to wrap it up and then sanding fairing which should be done by weekend