Re: 23' inboard Restoration
 

to bad i don't have the original console Lol [image]http://i1224.photobucket.com/albums/...ousepotter.jpg[/image]

Re: 23' inboard Restoration
 

Very cool. Where did you ever find that? The company also made seat doors for the big console....the previous owner of my boat purchased one that I installed.

Re: 23' inboard Restoration
 

Bill potter sent it to me

Re: 23' inboard Restoration
 

[image]http://i1224.photobucket.com/albums/...-23-39_631.jpg[/image] [image]http://i1224.photobucket.com/albums/...-27-22_929.jpg[/image] [image]http://i1224.photobucket.com/albums/...5-25-45_60.jpg[/image] [image]http://i1224.photobucket.com/albums/...-26-14_374.jpg[/image]
little more progress decided to use my penske board for the decks ! just set up a laminating table and waxed it we'll see how this goes desided to take a break and remember why I'm doing this went fishing with a friend and caught some nice stripers [image]http://i1224.photobucket.com/albums/...-46-13_696.jpg[/image]

Re: 23' inboard Restoration
 

First time making a fiberglass panel! didn't come out half bad there was a few area's but all and all it looks real good [image]http://i1224.photobucket.com/albums/...-29-33_327.jpg[/image]

Re: 23' inboard Restoration
 

Is that for your anchor locker? I believe you may need to cut it in half to get it in there without popping the cap. If you still have the mold I might be interested in using it for mine! :D

Re: 23' inboard Restoration
 

my cap is still loose from all the restoration also the panel I'm just laying out on a table then cutting the sheet to the shape if you want to use the table come on over! then im going to core it with core cell then seal the edge's with 830 putty and paint.

Re: 23' inboard Restoration
 

ahh I didn't realize, looked like you had re-attached it. I am still on the fence about how to replace mine. Its a project for down the road even though it kills me to see the rotten plywood sitting there.

Re: 23' inboard Restoration
 

anybody on the cape have a good table to lay up some deck skins need to lay up 8 of them 4x8 and i can't see to get a table to work correctly :D suggestions ? keeps getting destroyed ? or could do the for me and core them with my pensky board and all my material?

Re: 23' inboard Restoration
 

also anybody need a garmin 6208 its new!!