I used Belzona on my inboard tanks. Awsome product! They still look like the day we coated them!

Good To know.. I have seen and used this product in the Harshest environments. Chiller towers in a power plant. Vert. turbine motors and pumps..... all in saltwater,, very very salty and wet.. and wastewater pumps and mixers.. I plan on using on my bracket as well. I will roll it on and sand between coats. I will use as a faring compound as there will be the top that needs to be fair...Yea I love this stuff very easy to use..from there 1111 to 1341 and so on.. Will try the 1341 on maybe the lower units of the mercs..

bracket is back
 

ready for prep work.. I took the bracket to Braddock Metalluregy in Jacksonville. Had them re temper to 67-69 BRH I then took the bracket to my co- worker who builds Rollcages for Dragcars..Underpresser Racing. He welded the platform back to the tub.. Will need to knock the welds down and blast ,chem clean, then coat.. Looks like a great week for it No humidity

Bracket
 

This was an expensive Mistake but all in all I did learn a lot from this experience. Never ever Take alum to 800 degrees

How long have they been in Service..?

transome brackets
 

Here are the brackets I picked up from BadaBing in Orlando when he parted out his seacraft

Mock up and layout of console

laying out console with mdf melamine
 

Built a mock up with cardboard and now it is time to build console.

I will fillet the corners , wax and PVA the mold... there is a 3" toe kick all the way around.. which will be built after the console layed up

Not much going on started to demo the front fish box and infloor live well rain cam so had to stop..