http://www.classicseacraft.com/commu...pictureid=3087
http://www.classicseacraft.com/commu...pictureid=3086
http://www.classicseacraft.com/commu...pictureid=3085
Sole tabbed in and front 4' of sole glassed with 12oz biax and epoxy.

http://www.classicseacraft.com/commu...pictureid=3088
Insulated fishbox lid test fitted. Still lots of fairing and sanding and priming to go. Gemlux friction hinges and turn latch.

"Lots of fairing and sanding to go", the life of people working on 40+ year old boats! :)

http://www.classicseacraft.com/commu...pictureid=3094
Anchor locker door primed
http://www.classicseacraft.com/commu...pictureid=3095 fishbox lid primed
http://www.classicseacraft.com/commu...pictureid=3096
Console, a mock up leaning post and the splashwell test fitting

http://www.classicseacraft.com/commu...pictureid=3103Router template
http://www.classicseacraft.com/commu...pictureid=3098
Shape routered in old storage doors. They will get CNC cut Vdh logos in them.
http://www.classicseacraft.com/commu...pictureid=3099
Original dash panel getting new vdh cutout for inset Tach

My buddy Steve at Zeus Co woodworks is going to CNC carve this logo into my old storage doors for the rear lockers with out the "19"
http://www.classicseacraft.com/commu...pictureid=3106

If you are corona bored check his site out.

That's gonna look nice!

http://www.classicseacraft.com/commu...pictureid=3107

VDH cutout will hold the Suzuki multi function gauge

Small round cut outs will hold Fuel , volts, trim and keyswitch

I raised up the platform on my 23- fully cushioned now and more depth on storage....

http://www.classicseacraft.com/commu...pictureid=3108

Got next section of 12oz biax down. Then fill and fair