Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   Seat/sink/stove combo (http://www.classicseacraft.com/community/showthread.php?t=16346)

toppintom 02-19-2006 11:36 AM

Seat/sink/stove combo
 
I have the original passenger seat to a 73 seafari I would like to trade for a pedestool seat

Bryan A. 02-19-2006 11:10 PM

Re: Seat/sink/stove combo
 
Dibs. Got any pics? I might be interested for my Whitewater. Is the stove alcohol or propane? Where are you located? A general location in your description helps for things like this.
I have got a few different pedastals and seats in the shed for trade.

Bryan A. 02-19-2006 11:17 PM

Re: Seat/sink/stove combo
 
I found from another post you are in Mass.
Does it look like this?

http://www.classicseacraft.com/broch...edium/0013.jpg

Bryan A. 02-19-2006 11:25 PM

Re: Seat/sink/stove combo
 
Or this one maybe? In the bottom picture it looks like the seat folds forward revealing the sink and a shelf for the stove.

http://www.classicseacraft.com/broch...edium/0011.jpg

toppintom 02-20-2006 12:36 AM

Re: Seat/sink/stove combo
 
It is different than both. It flips open both ways. One side is small holding a small alcohol stove the other side which flips to stern is a table. its in good shape for 33 years old. I also have the original cushions for the cuddy, red,white, and blue tweed looking in good shape which I plan on redoing if anyone is interested. I'm on the lower cape.
Just went to the Bayside to see the new boats today, no seacrafts there. Little disappointed. The Abermarle 26 diesel inboard looked nice though. Dreamin' will make you mine.

Bryan A. 02-20-2006 12:55 AM

Re: Seat/sink/stove combo
 
Any pictures of it? How about rough dimensions, L x W x H. How does it attach to the deck?
I am on the Coast of CT, near the mouth of the Connecticut River. I am on vacation this week and might be willing to take a road trip. Are you interested in trading for seats? Do you need bases to or just the seats? I think I have a few todd seats with cushions in different styles in the shed, even a ladder back that is all apart but the pieces are there. I am not sure of the make. Let me know.

toppintom 02-20-2006 01:28 AM

Re: Seat/sink/stove combo
 
wood is screwed to the floor, then the box is secured to the wood. i can't give dimension now, boat is at the shop. I'd like to get a full seat with the base. hopefully something similar to the original driver side
tomseafari@yahoo.com

CapeBoater1 02-20-2006 08:44 AM

Re: Seat/sink/stove combo
 
Tommy, out of curiousity, I was on Rayber lane in Orleans yesterday and saw a red (I think) Seafari being backed into one of the industrial buildings. Might that be you and your shop! Just curious, whole small world thing. Cape is famous for that! If it is you I wouldn't mind checking it out if your interested.

toppintom 02-20-2006 09:23 AM

Re: Seat/sink/stove combo
 
the boat is blue and yes its on rayber at dannys house(Hey Dude's) I'm going to move it to Dougs right down the road. It's filled with stuff I'll probably empty today. but help your self at a look. If danny comes out tell him Tom said ok. Just a little reminder to everyone, CHECK YOUR TRAILER BEARINGS BEFORE YOU DRIVE! I was a little suprised to see my wheel at a 45 degree angle. I was told it had new hubs/bearings. can't always trust the 85 year old man

Bryan A. 02-20-2006 09:41 AM

Re: Seat/sink/stove combo
 
I don't have any original seacraft stuff but I have a few seats and a short base. Let me know about the stove. I am interested, I'm sure we can come to an arrangement. Welcome to the site!


All times are GMT -4. The time now is 07:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft