Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   boat name on transom (http://www.classicseacraft.com/community/showthread.php?t=24001)

jaybap 05-14-2012 11:56 AM

boat name on transom
 
Im putting my boat name on the transom of my 20CC. Not sure if I should put boat name on one side and hailing port on the other. Or both on one side. Any of you guys have pics of yours? I need some inspiration.

Mikem8560 05-14-2012 04:59 PM

Do you have a motherwell ut out that is why one side or the other?

Mikem8560 05-14-2012 05:01 PM

I used do do alot of lettering snd most on a transome with outboards it was on the left and the POC was smaller under the name

CaptMick 05-14-2012 05:18 PM

I have both on starboard side. Swim ladder is on the port side.

GodsReel 05-15-2012 07:30 AM

1 Attachment(s)
23 but an example of on the side

jaybap 05-15-2012 08:49 AM

Yeah im going starboard side with both. Thanks for the input.

Islandtrader 05-15-2012 08:53 AM

Normally hailing ports are put on larger boats...however I do like the name on the sides for most CC.

csurf 05-15-2012 11:36 AM

Hailing ports are only required if the boat is documented. And according to the requirements it must be on the stern, and the name also needs to be on the both sides of the bow. My 2 cents is don't bother with it, just put the the name on her. If you decide to move the boat you'll have to change it, or if you sell it the next owner will need to do the same.

parker2120 05-15-2012 12:36 PM

when i had my boat i had to put the name on both sides because i was documented for coastwise fishery,name and port on the back

GodsReel 05-15-2012 09:32 PM

for the record mine is on both sides


All times are GMT -4. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft