![]() |
Paint Job
My husband and I just purchased a 1978 23-footer in desperate need of a paint job. As this is our first watercraft (and visit to this very informative site), can anyone recommend a better/longer-lasting brand of paint? Also, if the boat gets moderate saltwater use, how often might it need repainting? We checked out all the great photos and wonder what color was used on Mr. Sirotnak's beauty?
|
Re: Paint Job
Merriweather,
Check out this link. http://www.classicseacraft.com/cgi-b...c;f=3;t=000003 Lot's of useful information on Painting... |
Re: Paint Job
Hi Merriweather- Bill Sirotnak here, the color on mine is called fighting lady yellow and when I bought the hull, the yellow had already been done recently with Awlgrip or Imron, I just had to do the bottom and the cockpit/topsides.As for the type of paint, on the outside I would use a 2-part.Imron,Awlgrip,Sterling,Interthane are all good.If you're going to do it yourself,many people have rolled and tipped with good results.If you spray this stuff, you need an air supplied respirator as it is VERY toxic.For the cockpit/topsides I used Easypoxy only because I wanted to spray it and I was doing it in the driveway and didn't want to take a chance.But the Easypoxy has held up well.Hope this helps, congrats on your new ride!
|
Re: Paint Job
Thanks for the information and well wishes, fellas. Is it a good time to paint her or do we need to wait for it to get warmer? there seems to be so much to learn. glad to know you're there!
|
Re: Paint Job
It depends on where you're painting it.I would say you want it to be a good steady 60 degrees or so.
|
Re: Paint Job
IF YOU USE A 2 PART PAINT LIKE AWLGRIP OR STERLING YOU CAN LOOK AT LEASE 10 YEARS OR MORE OF QUALITY PAINT APPEARANCE. MOST PEOPLE THAT SPRAY PREFER AWLGRIP BUT IF YOU ROLE AND TIP STERLING IS PROBABLY BETTER. I DID MINE WITH ROLE AND TIP AND IT CAME OUT LOOKING VERY GOOD. THESE TWO PART PAINTS COST A LOT BUT COMPARED TO HAVING SOMEONE ELSE SHOOT THE HULL IT’S CHEEP.
PS: IF I HADE TO DO IT ALL OVER AGAIN I WOULDN’T DO ANYTHING DIFFERENT. STERLING –ROLL AND TIP FELLOW-SHIP [img]images/icons/cool.gif[/img] |
Re: Paint Job
Like everywhere else, the weather in Atlanta has been inconsistent and a much colder winter than usual.
Although we'll be anxious to get her in the water, sadly i'm afraid it won't be a steady 60 degrees for months. Bill, how long did it take to paint your SeaCraft? (Ours is the same length as yours- and she's definitely a beauty! Perhaps we'll attempt to duplicate what you've done.) Also, are there any winter maintenance tasks we should be handling now? Thanks for your help! |
Re: Paint Job
Merriweather-
If you're not replacing the gas tank or engine you should pickle your gas tank with fuel stabilizer and winterize the engine. With the cold temps that have been hitting Atlanta these days...you don't want anything to freeze up and be damaged. Also, remove the batteries and put them on a work bench and attach to a trickle charger. If the batteries are shot and fail a load test, recycle them and buy new ones in the spring. There is probably 20 other winterizing tasks that I am forgetting as of now, but those are the major ones and will get you started in the right direction. Congrats on the new boat! Ed Mancini |
Re: Paint Job
Merriweather-
If you're not replacing the gas tank or engine you should pickle your gas tank with fuel stabilizer and winterize the engine. With the cold temps that have been hitting Atlanta these days...you don't want anything to freeze up and be damaged. Also, remove the batteries and put them on a work bench and attach to a trickle charger. If the batteries are shot and fail a load test, recycle them and buy new ones in the spring. There is probably 20 other winterizing tasks that I am forgetting as of now, but those are the major ones and will get you started in the right direction. Congrats on the new boat! Ed Mancini |
Re: Paint Job
Merriweather - It took me a year to redo "The Beach Blonde" BUT most of that was recoring panels, and redoing console, then you got wiring, rigging, and of course the bottom got completely stripped and barrier coated, and some transom work.Assuming I had nothing to do but prep and shoot, I could have done it in a couple weeks.Of course, here in Ct., it was May before I could either mix epoxy or paint.I would say that if your boat is all rock solid, and all you're looking to do is prep/paint - then all you can get sarted on now is removing hardware and sanding.Unless you can get it in a shed somewhere.I know it's hard, every night I pull in the driveway and there she is all covered up with a foot of hard snow on top, and I got a few projects I want to get done in the spring too.But I'll tell you, after sweating like a dog (o.k. they don't sweat) all summer long on that thing, it was one good feeling when I finally took that first ride in Sept.
|
Re: Paint Job
Merriweather - It took me a year to redo "The Beach Blonde" BUT most of that was recoring panels, and redoing console, then you got wiring, rigging, and of course the bottom got completely stripped and barrier coated, and some transom work.Assuming I had nothing to do but prep and shoot, I could have done it in a couple weeks.Of course, here in Ct., it was May before I could either mix epoxy or paint.I would say that if your boat is all rock solid, and all you're looking to do is prep/paint - then all you can get sarted on now is removing hardware and sanding.Unless you can get it in a shed somewhere.I know it's hard, every night I pull in the driveway and there she is all covered up with a foot of hard snow on top, and I got a few projects I want to get done in the spring too.But I'll tell you, after sweating like a dog (o.k. they don't sweat) all summer long on that thing, it was one good feeling when I finally took that first ride in Sept.
|
Re: Paint Job
Billybob, from the looks of the photos of "The Beach Blonde," it was a year well spent, sweating like a dog or not (I heard they sweat through their tongues). Did you have help? We're in the process of naming our Seacraft, but so far we haven't been able to agree on anything. Is your boat's name in reference to her paint color? The snow will melt and she'll be back on the water before you know it. All boaters say the same thing about winter. Too bad this wasn't a sunny, windless day in May. Sigh.
|
Re: Paint Job
Yeah, it's sort of a play off bleach blonde - since it's a washed out yellow, and it's not her original color - ya know.Oh I had help alright, if you check out the last photo that's Greg, my trusted assistant "the shadow".He was about 10 years old then, I did make him get lost when I was actually spraying, but he was by my side for the whole rest of it.We also bought an old engine, so we spent a lot of time fixing that too.I think he has a lot of my gearhead genes in him.Of course, we can never sell "the boat that we built", as he likes to say.
A project like this is a great way to spend some quality time with the kids, too. |
Re: Paint Job
Billybob, I revisited your photos and wonder if you weren't worried about spraying in an enclosed area? We have a garage but unfortunately it's not heated, otherwise we could get started on the paint job preparation. Considering his age, which parts of "The Beach Blonde's" overhaul was your helper competent enough to assist with? I agree it's a great activity to involve the kids in and we might give it a try if your experience was not too trying. Liked how you played off bleach blonde. We're getting close to agreeing to "On The Brink" if only because that's where we're headed because we can't agree on a name! By the way, I dabble in photography and think the photo of your boat docked at the marina is poster quality!
|
All times are GMT -4. The time now is 08:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft