Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Performance (http://www.classicseacraft.com/community/forumdisplay.php?f=5)
-   -   Control cable Length on 23 CC (http://www.classicseacraft.com/community/showthread.php?t=14425)

thedink9 06-03-2004 12:50 PM

Control cable Length on 23 CC
 
Can anyone tell me how the control cable lengths are derived? Overall length (end to end) or are they measured from the knob at the binicle side to the adjustment knob on the engine side?
I think I need 20 ft. cables as that is what an old one measures between the knobs.
What size cables are you 23' CC guys using? I guess this is another way to doublecheck.

Thanks Dink

Miles Offshore 06-03-2004 05:40 PM

Re: Control cable Length on 23 CC
 
Dink, pretty sure mine are 20' also. I recently replaced but I can /will check again tomorrow.

thedink9 06-05-2004 01:25 AM

Re: Control cable Length on 23 CC
 
Miles Offshore

Were you able to check?

Miles Offshore 06-05-2004 08:17 AM

Re: Control cable Length on 23 CC
 
T-boomers yesterday evening dink-apologize will do it today,hope its not to late- will know by 5 or so.craig

thedink9 06-05-2004 08:34 AM

Re: Control cable Length on 23 CC
 
Craig

Thanks. I don't need to order until Monday, so I appreciate your help. Dink

strick 06-05-2004 09:31 AM

Re: Control cable Length on 23 CC
 
20's will work fine. I just ordered some new cables and I ordered 22's for my 23cc with a 30 inch bracket. The ones that I pulled out of my 23cc were 16 feet end to end.

Strick

thedink9 06-05-2004 08:09 PM

Re: Control cable Length on 23 CC
 
Thanks Strick
Dink

Miles Offshore 06-07-2004 07:23 AM

Re: Control cable Length on 23 CC
 
Dink, mine is 20' even- craig

thedink9 06-07-2004 10:49 AM

Re: Control cable Length on 23 CC
 
Thanks Craig for looking / measuring. I'm ordering today. Dink

Rich 06-07-2004 02:57 PM

Re: Control cable Length on 23 CC
 
So it's safe to assume that the Hydraulic hoses of a SeaStar system would need to be 20' also????

Miles Offshore 06-07-2004 04:00 PM

Re: Control cable Length on 23 CC
 
You know somebody needs to gimme a crack up da side of the head. My cables are 20' but run from the console down out and back up to my transmission and motor under my console. Dont know what the heck I was thinking- [img]/images/graemlins/confused.gif[/img] The cable steering control from my old teleflex system is also 20' but since my boat is an inboard I am going to cease and desist answering from an i/b perspective- sorry guys [img]/images/graemlins/frown.gif[/img]

Rufridr069 06-08-2004 02:18 PM

Re: Control cable Length on 23 CC
 
Rich...lemme guess you want cables too?? LOL

Rich 06-08-2004 03:39 PM

Re: Control cable Length on 23 CC
 
Yep..

I need to buy controls and all the rigging for my engine plus I need to buy a hydralic steering system.

I've asked the same question in a previous post, but didn't get a direct answer. The responses were always the procedure on how to measure for the correct length, the problem is that the console is not installed in the boat yet, so I would be guessing at the actual length needed. [img]/images/graemlins/crazy.gif[/img]

strick 06-08-2004 09:35 PM

Re: Control cable Length on 23 CC
 
Rich- If you get 20 foot hydraulic hoses it will be more then enough.

Strick


All times are GMT -4. The time now is 01:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft