need help with id
 

i found what i think is a seacraft but the only tag i can find is on the bathroom door it is brass with a sail boat under that in large leters is relief and in small letters in the bottom seacraft weymouth mass it looks to have a small block chevy motor and on the outdrive it has o m c sterndrive 800 in large letters then under that in small letters 200.olso it looks like ken kureks 25foot bu it has seats built in the front deck on both sides of the hatch coming from the cabin
any help would be great http://www.dotphoto.com/go.asp?l=jeepman01&AID=1577083

Re: need help with id
 

...well, in image DSC00696 I notice a set of twin horns that I have not seen on any other SeaCraft 25's that I recall [img]/images/graemlins/confused.gif[/img]

Re: need help with id
 

The images are not of a SeaCraft built by Potter, CSY or Tracker. But it certainly is a classic...

Re: need help with id
 

I didn't realize any boats were built in Weymouth MA.

Re: need help with id
 

Jeep,

Welcome to the site, I think you are going to fit in just fine!

Does the previous owner offer any insight as to the history of this vessel? Is is all original or were any additions made?

Re: need help with id
 

so fare the people cant find the title are know the year??
any ideal what it is maybe

Re: need help with id
 

http://www.dotphoto.com/SAN1/12/23/B...31B11ACD6C.jpg
http://www.wellcraftv20.com/gallery/...0/DCP_2908.jpg

What a mess!!!
It's the steplift hull for sure, but what flavor?
How many feet? probably anacapri or alim or homemade.

Re: need help with id
 

total lenth is 22feet 6 inchs the drive ads another 2 feet also took some other photos of the tag

Re: need help with id
 

Damn I thought this was about id, not id. Can't control mine either.

Re: need help with id
 

ok what kinda price on something like this motor dont run hull has no cracks to speak of ??????????????

Re: need help with id
 

Jeep - They should pay you to take it away!! - Run

No cracks b/c it was painted camo.

22'6" it's probably an anacapri

Re: need help with id
 

Re: need help with id
 

went back two owners the title is 25 foot luger monte carlo 1973 what price is it worth????????

Re: need help with id
 

That's tough to say, considering this is a SeaCraft site. [img]/images/graemlins/confused.gif[/img]

Re: need help with id
 

i know slap me [img]/images/graemlins/confused.gif[/img]

Re: need help with id
 

I'm not trying to be mean, but I think the trailer might be worth more without the boat on it.

Re: need help with id
 

It's not a SeaCraft. Let's let this thread gracefully slip away.

Re: need help with id
 

Not slip, run...

Re: need help with id
 

send them a bill for your mileage and time to look at it.

Honestly, you are looking at something light years away from anything worth restoration effort. Except in Wayne's World, did you ever see a restored (i.e. "running") AMC Pacer? A quality boat hull worth putting some $ into is like finding an original 289 Mustang in somebody's barn. Unfortunately, this is not a 289 Mustang...sorry to be harsh

Re: need help with id
 

Weymouth has produced a couple of damn handsome Seacraft owners; the 1951 model is an exceptional year, but Seacraft boats?? I don't think so!! Come to think of it I might have seen that boat at Whitman's Pond. It was in 15 feet of water and I used to pitch a jig and pig to it! [img]/images/graemlins/smirk.gif[/img] [img]/images/graemlins/wink.gif[/img]