![]() |
New Project
Well today I started a transom job for one of my customers.
I will be postings pics as I go along. The boat is a 1978 23'. The one thing that is amazing is tihs boat is dry. The transom has been wet but the stringers are dry as a bone. At one time somebody did some work back here and did a misrable job. As you can see, the aft access has been glassed over and with only a layer of mat. Well here is the first set of pics. More will follow when I remove the outer skin and live well over the next few days. Bill http://www.optiguy.com/pic/whole.jpg http://www.optiguy.com/pic/closeup.jpg |
Re: New Project
So you will be doing it from the outside in?
|
Re: New Project
Yes, this will be an outside repair as the ply is very wet across the entire transom and the outer skin has come away from the ply across the entir transom. The customer does not want the live well and by removing it allows easy acess to the inside for adding large knees for more motor support.
|
Re: New Project
Todays progress in pictures. The live well and outer skin have been removed. If you notice on the Port side is an old repair as the plywood is different and better than whats around it. The Stb. side is dry rotted on the whole side.
The rest or the trans is soaking wet. Tomorrow the wood removal starts and final cuts up near the towing eyes. I dread getting them out as Seacraft installed them before the deck was put on and access is almost nill. In the picture showing a tool, who can guess what it is and what blade is on it. For those who don't know what it is, if you ever get a chance to use one you will never cut fiberglass with anything else. No dust, no itching no problem. Bill http://www.optiguy.com/pic/trans2.jpg http://www.optiguy.com/pic/misc.jpg |
Re: New Project
It's an occilating saw. I have the same one but a battery powered version. I use it for cutting casts on horses out in the field. Never thought of using it on the boat however. Thanks for the tip
Strick |
Re: New Project
Got a link to the tool? I alway's need a new tool. [img]/images/graemlins/smile.gif[/img]
|
Re: New Project
looks like a 4 1/2" grinder. How does it work so there is no dust? (Noank where were you a few months ago??)
|
Re: New Project
Quote:
I have the cordless one but I would get the one with a cord if you are going to use it around the shop. Bought mine thru my veterinary products distributer but I think you can find one easily at a big tool supply place. I think they are made in germany. Strick |
Re: New Project
|
Re: New Project
It is a Fein Tool. And it does oscillate. There are many attachments like all the other tools by other makers but the Fein has survived this type of work for over 10 years. The blade is the trick. It is high carbon steel and about $50 for the blade. And the blade is somewhat fragile and prone to cracking. But once you learn how to use it, you will be amazed. I by my blades from Jamestown Distributors.
When using the tool it just throws off really tiny chuncks of fiberglass and the blade will not cut you. I just can't say enough about it. Bill |
Re: New Project
Are you sure?? I looks like the same saw we use to cut off the top of someones skull to remove the brain. Hmmm might have to swipe one of them from the morgue.....the saw that is.
|
Re: New Project
Noank, I too have the fein tool with the attatchments mentioned. I used the velcro triangular sanding pads to sand my teak louvers on my cabin door. That tool is a must have for guys that like stuff.. Heres an fyi on its development. Many years ago Mercedes needed a tool to separate the adhesive seal on the windshield and frame. They contacted the german tool maker fein to build them the particular tool. They did and now it has evolved into the wonderful versatile tool that it is. just my .02
|
Re: New Project
Bratpack;
This tool could do brain surgery and not splatter all over the place. Actually Fein tool is the company that invented the electric drill. Their line of vacumns and dustless sanders and grinders are also wonderful. Bill |
Re: New Project
thanks for the tip!!
|
Re: New Project
Well today's progress was slow and I only had a few hours to work on this boat. Most of the exposed wood was removed.
After the Holiday weekend I expect to spend about 6 to 8 man hours to finish removing the wood and any other glass cutting that must be done. The replacement wood and foam core materials were delivered today and hopefully sometime next week the pieces can be cut and fitted. This all depends on no one wrecking their boat over the weekend and jamming another project up my butt. That's all for this week. Everyone have a happy 4th. Bill http://www.optiguy.com/pic/trans3.jpg |
Re: New Project
Good stuff NoankBill... - Realy debating pulling that livewell out
I'm gonna need to see you and say hello next time I'm down Wequetequok [img]/images/graemlins/grin.gif[/img] |
Re: New Project
Yo John
Whats the status of that "Kick Azz" console refurb you were designing? http://www.click-smilies.de/sammlung...smiley-035.gif BTW: You still don't have a "HDS" on that '79 Potter Hull http://www.click-smilies.de/sammlung...smiley-018.gif |
Re: New Project
Quote:
Can you still get some? Happy forth dude - still pourin' and sniffin' lead http://www.striped-bass.com/StriperT...bootyshake.gif ? |
Re: New Project
Quote:
|
All times are GMT -4. The time now is 11:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft