Bow rail, 20 ,deep 6 or repair
 

My low design bow rail on my 20 Potter cc , One of the stand offs is broken the rail is scratched up a bit but not pitted. I was thinking of removing it ...Anyone here take theirs off? Do you think it takes away from the look or value of the boat with the rail removed? Any safety issues? I am thinking of removing it and put some screws in the holes. I know it will be hard to match the 35 year old gel coat. the rest of the boat is all org. and in very good cond. It would be EZ to wash or wax the boat without the rail Joe R 1970 Potter cc

Re: Bow rail, 20 ,deep 6 or repair
 

Repair it and put it back. You can probably get standoffs from one off the members who up graded to stainless and besides it really comes in handy if you fish in crowds or off-shore. - PF

Re: Bow rail, 20 ,deep 6 or repair
 

If its gonna be a BAY boat then it probably does'nt matter ? Its one of the best looking/fitting rails out there. Saftey ----Come ride with Capt. Chuck or I & it'll stay fo' Sho" [img]/images/graemlins/grin.gif[/img]
look kinda funny without it too.My vote is to Keep it. [img]/images/graemlins/cool.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

Hi Joe

I recommend you replace them all. I think there is only 10 or so. Taco makes some "GUCCI" polished Stainless steel ones. That low rail is one of the Classic SeaCraft inventions [img]/images/graemlins/shocked.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

Just to be clear, are you talking about the rail that came in the 20' Master Angler (like in the 23') or merely the 3" high off the cap version in the standard 20'? If it's like the one in the 23's, a few companies make a really nice round post with hex nut right through the top/middle to replace the original ones and they are a significant improvement. If it's the 3" standard low rail, I'd unbolt it and find the closest dumpster.

Re: Bow rail, 20 ,deep 6 or repair
 

I've been looking for something like that. Do you have any more info so that I can look into it?

Re: Bow rail, 20 ,deep 6 or repair
 

It is the 3 in low bow rail that is mounted on the top of the gunnel ,not the inside type thats on the MA . It starts about 12in from the bow and gos down each side past the console ,I see most restored 20s took them off for a cleaner newer look .The boat is 35 years old but orig gelcoat is still fairly good along with the fighting lady yellow hull. all the teak is varnished as well. I am not to good with the camera but there are some photos of the boat in the gatherings form at the N.J. Flying Cloud get together MY MAIN CONCERN IS FILLING THE SCREW HOLES THAT WILL BE TO THE DECK. I guess I have to think if I want to keep everything Orig. THANKS Joe R

Re: Bow rail, 20 ,deep 6 or repair
 

Roger, let me give the guy who redid mine a call and find out where he is getting those. He redid a 23' last year that had replaced the rail and posts and it was the nicest I have ever seen. I'll ring him and get back to you on that one.

Re: Bow rail, 20 ,deep 6 or repair
 

Oh that rail - I would remove it. [img]/images/graemlins/cool.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

WELL I took it off ...what a pain in the a getting it off.It does look cleaner BUT I now have to fill the screw holes .I just bought pigment and gelcoat but I know it will be hard to get the white TO match .ANY ideas thanks Joe R

Re: Bow rail, 20 ,deep 6 or repair
 

Run a 1" tape line around the top cap outside & Inside . Then NoN-Skid it. Slight contrasting paint.Cleans it up & will stop Ya from slipping off(What the Foot/Hand rail did before.
http://www.frenzie.com/bimini%20out.JPG
Just an idea. [img]/images/graemlins/cool.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

Yo Tug

What kind of "VERMITS" y'al gots hanging around that SeaCraft that you need to squirt 'em with that yeller thing [img]/images/graemlins/confused.gif[/img]

http://img.photobucket.com/albums/v1...mitstopper.jpg

Hope it's not one of dem "Cooters" you be servin up on a plate of gritz http://www.clicksmilies.com/s0105/wu...smiley-011.gif

Re: Bow rail, 20 ,deep 6 or repair
 

Man! you guys get redder everyday. What the hell is the matter gritz? [img]/images/graemlins/confused.gif[/img] Ok fine grits. Is that better? [img]/images/graemlins/mad.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

LOOKING FOR GUNNEL MOUNT ROD HOLDER !!!!!!PLEASE HELP CHECK THE FOR SALE FORM FOR DETAILS THANKS JOE R, PS THANKS FOR THE INPUT ON THE BOW RAIL ITS OFF.

Re: Bow rail, 20 ,deep 6 or repair
 

Is this what you are talkin about:

http://www.classicseacraft.com/23intbow.JPG

if so this is the firm that makes them:

E tec Marine

Re: Bow rail, 20 ,deep 6 or repair
 

that be them.

Re: Bow rail, 20 ,deep 6 or repair
 

ContenderCraft [img]/images/graemlins/wink.gif[/img]

Re: Bow rail, 20 ,deep 6 or repair
 

Forgot the mention, that pic is courtesy of Seafari and as he mentions they are the same ones Contender uses.

Tx Rodney

Re: Bow rail, 20 ,deep 6 or repair
 

Thanks Jason,
Since we're talking recessed rails, The one I
used is 3/4 pipe, a little thicker than the
origional. With the E-tec stand offs, you can slide
them down the pipe so you can use the origional
holes. Also the cost of the E-tec parts and pipe
are only about 300.00. Its very important to bend
the new pipe exactly like the origionals!

Re: Bow rail, 20 ,deep 6 or repair
 

Thanks for the info. I've been in contact with E-tec. The fellow I spoke to said they were aluminum and the round needs 3/4 id pipe. This may not work for me since my fabricator already bought the 7/8 od tubing. I'll talk to him to see what can be done. If he can easily use the 7/8 on other stuff, I'll probably go with e-tec parts.