Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   For Sale (http://www.classicseacraft.com/community/forumdisplay.php?f=7)
-   -   New Stainless fitting Gemlux / South Co etc (http://www.classicseacraft.com/community/showthread.php?t=15675)

Trayder 07-19-2005 03:26 PM

New Stainless fitting Gemlux / South Co etc
 
I have some leftover stainless goodies from my restoration that I would like to offer to the members of the site a deep discount:

(2) Southco slam Latches usually $50 each I would like $20 for on is good shape and $15 for one with scratches ( a little wet sand and buff and it would look new again )

http://www.classicseacraft.com/jason5.jpg



(3) stainless Gemlux Hatch pulls usually $25 each I would like $10.00 each


http://www.classicseacraft.com/jason1.jpg

http://www.classicseacraft.com/jason2.jpg



(1) Stanless pop up Fuel fill usually $65.00 I would like $30.00

http://www.classicseacraft.com/jason3.jpg

http://www.classicseacraft.com/jason4.jpg


These have been sitting in a box in my garage for 2 years so they are near new but have some box bite

prices include USPS Priority shipping in the continental US

Trayder 07-19-2005 04:49 PM

Re: New Stainless fitting Gemlux / South Co etc
 
SOLD

in under 10 minutes....YIKES this internet stuff is coooool.

Thanks Andrew!

flash14 07-19-2005 07:49 PM

Re: New Stainless fitting Gemlux / South Co etc
 
you got to be fast if you want to get the best deals![img]/images/graemlins/cool.gif[/img] I think 10 minutes may be my new personal record though. Thanks again Jason.

paulfurnari 07-19-2005 09:30 PM

Re: New Stainless fitting Gemlux / South Co etc
 
I didn't even have a chance. [img]/images/graemlins/frown.gif[/img]

Finster 07-19-2005 10:41 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Dude, is your thumb double jointed?? [img]/images/graemlins/grin.gif[/img]

flash14 07-20-2005 01:26 AM

Re: New Stainless fitting Gemlux / South Co etc
 
No double jointed anything....just dumb luck and summers off. [img]/images/graemlins/grin.gif[/img]

Finster 07-20-2005 12:23 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Not to be crude or anything, but it somewhat looks as if that fuel fill is being violated.... [img]/images/graemlins/laugh.gif[/img]

flash14 07-20-2005 01:26 PM

Re: New Stainless fitting Gemlux / South Co etc
 
hehe....look to the right and cough for me... [img]/images/graemlins/blush.gif[/img]

strick 07-20-2005 08:42 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Quote:

Not to be crude or anything, but it somewhat looks as if that fuel fill is being violated.... [img]/images/graemlins/laugh.gif[/img]

I was thinking the same thing Finster...we may need to start a special area for photos like that [img]/images/graemlins/blush.gif[/img]

strick

Finster 07-20-2005 11:37 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Yeah well, I guess we have a new saying now, "Spanking the Fuel Fill". [img]/images/graemlins/laugh.gif[/img]

Capt Chuck 07-21-2005 12:20 AM

Re: New Stainless fitting Gemlux / South Co etc
 
Quote:

I have some leftover goodies from my restoration

The death grip on that fuel fill only shows the talent expertly acquired from the many hours refurbishing the "Thunder Pig"

This photo comes straight from 1950's Sears catalog, tucked secretly under the cabin mattress http://www.clicksmilies.com/s0105/la...smiley-008.gif

http://www.pettipond.com/laterimages...0_59wac022.jpg

http://i21.ebayimg.com/03/i/04/82/c7/3a_1_b.JPG

Finster 07-21-2005 02:32 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Thats funny! I have the same ones hidden on the tow boat. [img]/images/graemlins/grin.gif[/img]
Though I don't quite have that all powerfull kung-foo grip thing down yet. [img]/images/graemlins/blush.gif[/img]

flash14 07-21-2005 04:23 PM

Re: New Stainless fitting Gemlux / South Co etc
 
I wonder if he has mastered the one inch punch as well? I bet you he studied under Bruce Lee.

Capt Chuck 07-22-2005 12:17 AM

Re: New Stainless fitting Gemlux / South Co etc
 
Clandestine surveillance has uncovered more hidden treasures cleverly disguised by "Mr.Fist" among his normal boating gear as not to draw attention to the novice [img]/images/graemlins/tongue.gif[/img]

Found in the aft bilge locker wedged into a container marked "Lower Unit Grease"
http://www.lubery.com/store/catalog/...elly_thumb.jpg

Next, tucked in the corner of the foul weather locker, behold neatly folded within a shoebox marked
"Spare Pump"
http://photobucket.com/albums/v103/s...h_suckdoll.jpg

Last, tossed among the spare parts box. I'm sure these are the new Gemlux OutRigger clips, Right [img]/images/graemlins/confused.gif[/img]
http://www.lubery.com/store/catalog/603912104967.jpg

Scott 07-22-2005 01:10 AM

Re: New Stainless fitting Gemlux / South Co etc
 
Quote:

Clandestine surveillance has uncovered more hidden treasures cleverly disguised by "Mr.Fist" among his normal boating gear as not to draw attention to the novice [img]/images/graemlins/tongue.gif[/img]

Found in the aft bilge locker wedged into a container marked "Lower Unit Grease"
http://www.lubery.com/store/catalog/...elly_thumb.jpg




Dude you are tooooo much [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img]

catman115 07-22-2005 12:06 PM

Re: New Stainless fitting Gemlux / South Co etc
 
cap'n chuck
that is outstanding !!! My co-workers are wondering why I'm laughing at my computer screen.. I needed that

NoBones 07-22-2005 02:32 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Whoaaa, its startin' to get hot in here, I mean my office too. The secretarys closed my door I was laughing so hard.
By the way I think that pump was listed in the new Boat US
catalog. Ken

NoBones 07-22-2005 02:50 PM

Re: New Stainless fitting Gemlux / South Co etc
 
Capt Chuck, I think you forgot this? [image]http://http://i7.photobucket.com/albums/y273/krn54/200.jpg[/image]

nestorpr 07-24-2005 01:54 AM

Re: New Stainless fitting Gemlux / South Co etc
 
So that's why my outriggers haven't been performing well, I've been using the wrong clips! [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img]


All times are GMT -4. The time now is 06:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft