Emblem-CNC Drawing!
 

Here’s the CNC drawing of the SeaCraft Emblem....

It’s 1/8” thick, Mirrored Stainless Steel #304, laser cut.
Size is approx. 9-1/2” w x 2-1/4” high. Has 5 screw holes for mounting.
http://i78.photobucket.com/albums/j1...ftEmblemSS.jpg

Cost is $55 per emblem plus shipping & insurance.
1 Emblem = 55 + 5.50 = $60.50
2 Emblems (1 pair) = 110 + 6.50 = $116.50
3 Emblems = 165 + 7.50 = $172.50
4 Emblems = 220 + 13.00 = $233.00
5 Emblems = 275 + 14.00 = $289.00

With your check, please include your mailing name, and address (if different from what’s on your check).
Also, include your member name so I can cross reference it with my list of orders.

http://i78.photobucket.com/albums/j1...CDsAddress.jpg

Re: Emblem-CNC Drawing!
 

Here's the list of orders to-date. If there are any changes, or you wish to add an order, please respond.

I have a call into the SS fabrication shop to get a scheduling on when they will be run the production and I'll post as soon as I find out, but probably not until late next week sometime. THE DAY HE RUNS IT, IS WHEN I WILL GIVE HIM THE FINAL COUNT OF EMBLEMS.

1 EMBLEM:
elpez

2 EMBLEMS (1 pair):
Rich / Capt.Chuck / Strick / hermco / BryanA / Rodman / Yamtt125
Kerneltugboat / Scott / Briguy / Tarpun / Pfflyer / PeterB / Canes
TheDink / abl1111 / Wavelength / MilesOffshore / Bonefish
Oldbluesplayer / Oldfielder / gigolot

3 EMBLEMS:
dljohn

4 EMBLEMS (2 pairs):
1bayouboy / FourBoatTheory / 65Bowrider / Rockdoc / JW-Tex / LouJr
toddslures

5 EMBLEMS:
NoBones

Thanks to all of you, we have been able to make this happen!

Re: Emblem-CNC Drawing!
 

How did Hermco get a lowercase H? It looks like they will be great. Nice work! I am trying to get Bill Potter to order a pair! :D

Re: Emblem-CNC Drawing!
 

can i still get one of these ?

Re: Emblem-CNC Drawing!
 

Thanks Carla

I think I'll take another pair for the next project so thats 4 total for me. I'll send a money order next week.

strick

Re: Emblem-CNC Drawing!
 

Ugh Don?, maybe from your web link. :D www.hermco.net


See ya, Ken

Re: Emblem-CNC Drawing!
 

Carla,

Very, very impressive. Greatly appreciate it. I will get the check out to you this week.

Peter

Re: Emblem-CNC Drawing!
 

Carla - I'd like to sign up for 2 . . . if it's not too late.

Re: Emblem-CNC Drawing!
 

Please put me in for 4 emblems. I will put the check in the mail today for $233.00.Thanks Keith Leverette

Re: Emblem-CNC Drawing!
 

Hi Big "H"!!!!!...sorry Don, that was just a typo.

I've made note of these additions. Thank you.

Strick, sure you don't need a dozen for your future projects? I'm enjoying all the pictures and admire the work you're doing. Very nice job!

Don't forget, a dollar is going to this site for every emblem purchased...so far, over $80 ... not bad!

Re: Emblem-CNC Drawing!
 

Carla,
Great job on a item that is going to be a rare emblem.
I would like to up it, to four emblems and the check will reflect that amount.
It will look good on my boat and truck and a gift,The check is in the mail,(nice to know it realy is) TYVM
Rome

Re: Emblem-CNC Drawing!
 

Ha 65Bowrider

I think this looks great I will take 2 emblems, (1 pair) thanks for putting in the time to put this together I will put check in mail today.

FellowShip

_______________________________________________

My motto: Just for the Grins :D

Re: Emblem-CNC Drawing!
 

Carla,
Please pencil me in for 2 emblems (One Pair). Check is on the way.
Thank You.
Jack Lyons

Re: Emblem-CNC Drawing!
 

Cashiers check sent today. Thanks Carla.

strick

Re: Emblem-CNC Drawing!
 

Four Boat Theory - 4 emblem order. Check's in the mail...

Re: Emblem-CNC Drawing!
 

Check for two snale mailed today.

Re: Emblem-CNC Drawing!
 

check sent yesterday for 3, thanks for all of your effort on this. :cool:

Re: Emblem-CNC Drawing!
 

My check is on the way for a pair of emblems. Thanks Carla!

Re: Emblem-CNC Drawing!
 

Carle,

Do you accept 3rd party endorsed, out of state starter checks? [img]/forum/images/graemlins/tongue.gif[/img] If so my check for 116.50 is in the mail today. Thanks for all of your hard work on this. Now I have something useless to put on my mantle next to my Titanitm connecting rod from my NSX. (not kidding)

Re: Emblem-CNC Drawing!
 

I know this is my first post but I have been a long time lurker and admirer of this site.
Carla, thanks for taking this initiative! I would be grateful to be included in this by purchasing (4) total emblems for my 1969 SF20 that I've recently renovated. I still remember the original emblems from my early years on this boat in the 1970's - Fun Times!

Money Order is in the mail today.
Thanks,
Hal

Re: Emblem-CNC Drawing!
 

Thank you GroveGuy for your order, and welcome to the site.
One boat, 4 emblems...hmmm...well decorated boat!

The checks are arriving...Thank you.

Brian (SS shop guy) is going to run one emblem, hopefully today to make sure everything works well with the new design. He has us scheduled for the production run next week. Apparently he is busier than I thought, and with the number of orders coming in (now over 100), the 'run' will take some time (laser cutting each detail).

So, anyone is welcomed to add/change their order...there is still time!

Re: Emblem-CNC Drawing!
 

Carla,

Great Drawing. I will get my check out in the mail tomorrow.

Thanks,

-Andrew

Re: Emblem-CNC Drawing!
 

my check is on its way for 1 pair !!! Thanks

Re: Emblem-CNC Drawing!
 

Checks in the mail ! Thx Carla ! GREAT JOB !

Re: Emblem-CNC Drawing!
 

Thanks Carla, check is on the way. BTW this emblem is going on a 1998 Seacraft 21, even though it's not a classic.
When the idea first came up, it had Miami, Fla. on the bottom, not classic, and being in Miami it fit right in.
Not an issue with me, but do not want to ruffle any feathers on this classic site.
I will understand if anyone has an issue with this, and bow out. Speak up now, before I bolt it on.

Re: Emblem-CNC Drawing!
 

check is in the mail :D (as soon as the ol lady gets off her arce and gets a stamp,lol.

Re: Emblem-CNC UPDATE!!!!!!!
 

I met with Brian from the SS shop today & picked up a sample. As you can see, it looks great!
http://i78.photobucket.com/albums/j1...r/SSEmblem.jpg

The first run, using 1/8" SS did not 'cleanly' cut the "CLASSIC", too thick of a metal for such thin lettering. Not giving up, he tried with 1/16" and it worked! So that's the way to go. (and it is strong)

Going with a thinner SS, we can afford the #316 stainless. It was originally what I wanted, but not at twice the price on the 1/8". I know we're all rich, but felt $110 PER emblem was a bit too steep. And I know you all know, how much better #316 SS is and how it will be more fitting to put on our classic boats that will last for another 30-40 years! (these emblems will last too)

THE PRICE REMAINS THE SAME, and we're using 1/16" #316 SS.

I hope no one is in a hurry for these, as #316 mirrored by the sheet, is a special order and will take approx. 3 weeks for delivery & the production run. But as soon as it comes in, Brian is giving it priority.

I know we're all anxious, but I believe it'll be worth it in the end....and as always, anyone is welcomed to change their order due to the changes mentioned here.

Re: Emblem-CNC UPDATE!!!!!!!
 

They really look BEAUTIFUL. I need a new fix of Gucci Bling http://floridasportsman.com/art/worthy.gif http://floridasportsman.com/art/worthy.gif http://floridasportsman.com/art/worthy.gif

I have an empty spot waiting

http://img.photobucket.com/albums/v1...back/vent1.jpg

Re: Emblem-CNC UPDATE!!!!!!!
 

That looks great Carla. I'm in no rush....I don't think my boat will be finished any time soon :cool:

strick

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla, They look awesome!!
I can see Capt Chuck's boat already :D
[image]http://i7.photobucket.com/albums/y273/krn54/vent1.jpg
See ya, Ken :D

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla - Those look DY-NO-MITE!!!!.
Can't wait to get mine!
I wish my 20 was painted already.

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla, thanks so much for the work you've already put into this project, they look GREAT!!!
I would like to add one more to my order of four for a total of five and I will send you out a check today for the total with my shipping address. And again, thanks for your great work.
Lou

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla,
Is it too late to jump on the bandwagon? Those look so nice and I see Lou bumping his order. Can you let me know.
Thanks

Re: Emblem-CNC Drawing!
 

check sent out this morning from Stuart so it should be there tomorrow/
mark

Re: Emblem-CNC UPDATE!!!!!!!
 

Lou, I've bumped your order to 5.

TheHermit, Not a problem adding an order for you. Glad you like them. Just let me know how many.

Cost including shipping & insurance,
1=$60.50 2=$116.50 3=$172.50 4=$233.00 5=$289.00

Please remember to include your member name when sending the checks. Thanks.

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla,
Please put me down for a pair (2). I'll send the ckeck down in the AM. Thanks :D

Re: Emblem-CNC UPDATE!!!!!!!
 

Hey Carla......
My check is in the mail....

Re: Emblem-CNC UPDATE!!!!!!!
 

Carla,
It looks great!!!!
Can't wait to get "IT"..
Thanks. :D

Re: Emblem-CNC UPDATE!!!!!!!
 

How do most of you plan on attaching them???? Screws, bolts, or rivets??

Re: Emblem-CNC UPDATE!!!!!!!
 

I had planned on using screws but rivets sounds to me like a better idea!just not sure about using aluminum rivets on stainless- do they make stainless rivits?