007 Deck Hardware
 

I'm considering doing the flush mounting hardware thing on my 23CC, i.e. cleats and nav lights. The SeaCraft with the recessed handrail and no bow rail seems the perfect candidate to get the flush deck treatment. I'd like to hear your experiences and the hardware choices you have made. The kind of cutting and fitting this requires, I'd like to have the best chance at choosing products that are of a quality that are going to last and remain on the market should repair or replacement be necessary.

TACO would seem to be the obvious choice for retractable cleats, but the bow lights are a little harder to come by. I have seen one unit made by Hella, a reputable manufacturer, but I've only found them available in the UK. It would be nice to combine flush with LED if possible.

Light me up.

Re: 007 Deck Hardware
 

Everything you need. http://66.206.15.129//

You can sometimes find Accon cleats and lights on E-bay. They make an LED bow light now.

strick

Re: 007 Deck Hardware
 

Check out the Accon line of cleats etc.

Accon LLC website

Great stuff and you can find some good deals if you shop around on the internet.. Lots of discussion here on the site - do a search for Accon.

I have several of the "pop-up" cleats and the "pull-up" bow light. Very well built and worth the money..

Re: 007 Deck Hardware
 

Strick... we were both posting at the same time on the Accon stuff... :D

Re: 007 Deck Hardware
 

I used Accon parts on mine

http://members.cox.net/rhstg44/SeaCr...lush%20bow.JPG

Re: 007 Deck Hardware
 

I went with GEM cleats and homemade alum. backing plates. They have welded (hidden) mounting studs instead of screws.

Re: 007 Deck Hardware
 

Has anyone used or seen the accon pop up bow chocks? I have a 6 inch pull up cleat for the bow of my 20' sf and I'm debating on going with the pull up chocks or none at all.

Re: 007 Deck Hardware
 

If you are interested in GEM or Accon parts I can get them for you as I have direct accounts with both of them. Just send me your wish list with the part numbers and I will give you a quote on it.

Re: 007 Deck Hardware
 

I need Accon (1) 210-M, (1) 210-MC, and (I think) (2) 202-6. Roger, which product did you select for the cleats? 6" Pop-up?

Todd you can email me at dennis@sherod.com for prices and ordering arrangements. Greatly appreciate the offer.

Wow, I'm glad I asked. Great help guys.

Re: 007 Deck Hardware
 

How about a price on part #500. Is a pair of the 4 1/2 inch pull up bow chocks. Thanks

Re: 007 Deck Hardware
 

6" yes.
pop up - no, they are pull up. I didn't want to deal with springs in the mechanisms.

Re: 007 Deck Hardware
 

pull up cleats

http://www.casdvm.com/photos/DSCN4339.JPG http://www.casdvm.com/photos/DSCN4341.JPG

strick

Re: 007 Deck Hardware
 

I will check these next week for you guys. I just need to know where you are for the shipping cost. You can e-mail me your shipping address, trr1rigs@att.net

Re: 007 Deck Hardware
 

Hey Dudes; While surfing I saw a Seacraft advertisement for some s/s hardware to replace my old vinyl hull side logos. Would someone give me the email address of the person getting these done? Thanks, Bodine

Re: 007 Deck Hardware
 

E-mails have been sent with your prices. E-mail me with what you would like to do. trr1rigs@att.net

Re: 007 Deck Hardware
 

I love the pop up cleats. Am thinking about getting two for the bow.

How difficult/messy is the installation?

Re: 007 Deck Hardware
 

I went with the Accon Pop up light, a single 10" Accon Pop up cleat and Pop up chocks. Also went with 4 1/2"
Accon pop up spring cleats. Looks NICE! I have an extra Accon pop up cleat. Believe it is either 6" or 10" brand new. PM me and I'll give it away at a very fair price.

Here is the link to my pix. Scroll down to see pix.
http://www.classicseacraft.com/forum...rev=#Post29029

Re: 007 Deck Hardware
 

Briguy - PM sent.