Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   For Sale (http://www.classicseacraft.com/community/forumdisplay.php?f=7)
-   -   1976 23 ft SeaCraft Sceptre (http://www.classicseacraft.com/community/showthread.php?t=18890)

rjm0604 03-09-2008 10:02 PM

1976 23 ft SeaCraft Sceptre
 
1976 SeaCraft Sceptre
Asking Price $12,000 OBO
Specs: 23', new Mercruiser 350 mag mpi 7/06, engine warranty until 7/08 w/additional coverage avail, new engine and outdrive professionally maintained by Cape Harbor (certified MerCruiser), new controls and cables 7/06, new garmin fishfiner 8/07, Lowrance chartplotter w/nav chip included 8/07 (chartplotter has radar hookup capabilities for all in one use), boat will travel w/single person at 40 mph cruising speed 27 mph, all electronics in working condition, SeaLion trailer included in price.
http://i255.photobucket.com/albums/h...DSC00007-1.jpg http://i255.photobucket.com/albums/h...SC000161-1.jpghttp://i255.photobucket.com/albums/h...DSC00013-1.jpghttp://i255.photobucket.com/albums/h...DSC00011-1.jpghttp://i255.photobucket.com/albums/h...DSC00009-1.jpg

Dilligaf 03-09-2008 10:36 PM

Re: 1976 23 ft SeaCraft Sceptre
 
where is boat located?? how is foor and transom?

rjm0604 03-09-2008 10:49 PM

Re: 1976 23 ft SeaCraft Sceptre
 
transom is in good condition....the floor had a little water under the passenger chair.I had it inspected last summer and i was informed it was minimal. The fiberglass company quoted me around 1,000 to repair completely. South Jersey area

Abe's Rocket 03-10-2008 09:46 PM

Re: 1976 23 ft SeaCraft Sceptre
 
What is the condition of the trailer? NJ-to-Maine?????

Cool boat!

rjm0604 03-10-2008 10:30 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Sealion trailer is in good condition...
I have clear title on both the boat and trailer.

bigeasy1 03-11-2008 04:25 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Which outdrive is on it,Alpha,or Bravo?.Any idea on how many hours on the engine and drive?

rjm0604 03-13-2008 09:06 PM

Re: 1976 23 ft SeaCraft Sceptre
 
The outdrive is alpha, I did put a call in to my mechanic for the hours on the engine and outdrive. They will both be the same since they were both installed at the same time. My guess is under 200 hrs.

htillman 03-14-2008 12:11 AM

Re: 1976 23 ft SeaCraft Sceptre
 
What would be the value of a Alpha outdrive connect to a 5.4? Merc. I have the opportunity to purchase a boat with this application but I do not need this motor. It is a 2000 model with less than 200 hours and in good condition.

rjm0604 03-14-2008 12:56 AM

Re: 1976 23 ft SeaCraft Sceptre
 
The boat had a 5.0. Mercury marine makes a 5.7 that is equal to 250 HP. The engine I had installed is a 350 mag MPI that is equal to 300HP. When I had the engine installed I went to mercury's website. There were only 2 mercury certified technicians(mechanics) in my county. Cape Harbor Marina who installed the engine and outdrive is one of them, they recommended the upgrade in power and the outdrive for the sceptre. That was 20 months ago and have had zero problems with performance of the engine and the outdrive.

htillman 03-14-2008 01:20 AM

Re: 1976 23 ft SeaCraft Sceptre
 
I am looking at a 1974 Sceptre that had the engine added in 2000. I think it is the same as your are referring to. I want the hull for a bracket modification therefore do not need the engine or outdrive and was curious to their value as I would like to make an offer for this boat. I have no clue to IO values and would be greatful for any info on their value.

Entourage 03-14-2008 06:56 PM

Re: 1976 23 ft SeaCraft Sceptre
 
This boat is a steal in my opinion if the hours are accurate. I just purchased a 350 mag mpi with bravo 1 outdrive new for my 74 Tsunami, and the cost was alot more than the asking price of this boat. But then again times are a little different now. :(

rjm0604 03-15-2008 07:22 PM

Re: 1976 23 ft SeaCraft Sceptre
 
The engine cost me 15,000 installed with outdrive 20 months ago.This did not include the new cables and control mount.

Abe's Rocket 03-17-2008 09:13 PM

Re: 1976 23 ft SeaCraft Sceptre
 
PM sent..

Abe's Rocket 03-19-2008 09:10 PM

Re: 1976 23 ft SeaCraft Sceptre
 
anyone know if this boat is still for sale?

Entourage 03-20-2008 06:04 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Don't know about the boat for sale, but how about that nice yellow lab is he for sale? :)

rjm0604 03-20-2008 08:27 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Yes , Abe the boat is still for sale.....reluctantly.

Abe's Rocket 03-20-2008 09:55 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Abe isn't for sale...but he appreciates the compliment.

RJM, is there a number I can get a hold of at? I sent you a PM thru the site with my contact info. Lets touch base soon

Thanks

rjm0604 03-21-2008 11:31 AM

Re: 1976 23 ft SeaCraft Sceptre
 
sorry for the delay, I answered most of you quetions in your e-mail. I also left a number to contact me with any more qeutions. Ray :D

Dilligaf 03-28-2008 09:29 PM

Re: 1976 23 ft SeaCraft Sceptre
 
sent you a PM never used it b4 did you recieve it?? if not send me some more info and a contact number thanks

Dilligaf 03-30-2008 06:26 PM

Re: 1976 23 ft SeaCraft Sceptre
 
still for sale???

rjm0604 03-30-2008 09:57 PM

Re: 1976 23 ft SeaCraft Sceptre
 
Yes...The boat is still for sale. I thought I sent you a PM on this. If the PM did not go through let me know I will resend it. Thanks.

Dilligaf 03-30-2008 10:04 PM

Re: 1976 23 ft SeaCraft Sceptre
 
didnt recieve did you get mine ? can you send a contact ##??

joehat70 04-22-2008 12:05 AM

Re: 1976 23 ft SeaCraft Sceptre
 
i will be in cape may tues 4/22 if boat can be seen please call me 631-680-1049 thanks. joe.

Dilligaf 05-31-2008 09:43 PM

Re: 1976 23 ft SeaCraft Sceptre
 
dont know if anyone cares but i bought this boat. its new home is in va beach. my buddy works for the govt and brought home a mercruiser comp has only 163 hours on it. took out in the bay last weekend pretty choppy and tabbed it down and run pretty smooth. pretty nice boat good deal. gonna have lots of questions for ya. starting with replaceing the floors.


All times are GMT -4. The time now is 07:54 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft