1998 Suzuki 225hp DT225T
 

Time for a new tramsom and bracket. The old Suzuki 225 is for sale. $2,500 gets it ALL. Going back with a Yamaha 250 4s 30" shaft. Pushes the 23 Sceptre at 38 mph @ 4950 rpms.

1998 225hp 25" shaft with 500 hours
2 ea. ss props (141/2 X 20)
side mount controls with cables
Tach, hour meter, oil guage with alarm
Shop manual

http://i149.photobucket.com/albums/s...8/DSCN0010.jpg

http://i149.photobucket.com/albums/s...8/DSCN0012.jpg

http://i149.photobucket.com/albums/s...8/DSCN0023.jpg

http://i149.photobucket.com/albums/s...8/DSCN0024.jpg

I am in Central South Carolina. I have a lift to put it in your truck.

http://i149.photobucket.com/albums/s...8/DSCN0008.jpg

The trim tabs are for sale too. Want fit under new bracket.

Re: 1998 Suzuki 225hp DT225T
 

That's a good motor and a good price. My 1998 Suzuki Dt 225, had 800 hours on her when I sold my ole' Mako.

I recently sold a 1998 Suzuki Dt 225 parts motor too.

Re: 1998 Suzuki 225hp DT225T
 

I have 79 Sceptre with this motor on it with about 300 hrs on it, i'm asking 13,500 with aluminum tandem trailer and i can't move it worth anything. But that is an excellent motor for the money. :) http://i256.photobucket.com/albums/h...l/DCP_6650.jpg

Re: 1998 Suzuki 225hp DT225T
 

How big are the tabs? All inclusive to the dash?
Thx,
GFS

Re: 1998 Suzuki 225hp DT225T
 

I think they are 12"x18". I will confirm measurment. Tabs are complete with pump, hoses, wiring harness and new dash mounted switches.

The Flow-Scan and water temp are only dash instrument that I will reuse. The tachometer (not shown) is the origanial Suzuki that was on the motor.

Re: 1998 Suzuki 225hp DT225T
 

Did you get my PM
GFS

Re: 1998 Suzuki 225hp DT225T
 

I did reply. $150 plus actual UPS charges. The tabs are 12" X 18" with rams, pump, hoses, wiring harness and new rocker switch.

Thanks, Phil

Re: 1998 Suzuki 225hp DT225T
 

Thanks Phil,
Let me know where to send the check. My zip is 33405.

Slowly, I`m setting her up just as imagined. Many thanks to all who have helped.
GFS

Re: 1998 Suzuki 225hp DT225T
 

Send me a PM with your address and I will try to ship it out on Friday.

Thanks, Phil

Re: 1998 Suzuki 225hp DT225T
 

Hi Phil,
Did you get my address? I can`t view my sent PM`s for some reason.
Thx,
Sandy

Re: 1998 Suzuki 225hp DT225T
 

Sandy,

Got the address. The tabs will go out UPS on Monday.

Thanks, Phil

Re: 1998 Suzuki 225hp DT225T
 

Let me know where to send Santa and his lunch money.

Thx,
Sandy

Re: 1998 Suzuki 225hp DT225T
 

Tabs are sold. Sending contribution to the web site. No one needs Susuki 225hp????

Re: 1998 Suzuki 225hp DT225T
 

Thanks Phil,
Thanks to No Bones for the help tooooo.
May have to trim down the planes a tad for ducer clearance. That will also take some of the Aquasport out of them.

Any opinions on putting in a bat wing flare?

Can I cut a hole in the plane for the ducer and still get a good reading. I`d like to keep as much of the plane as possible.

Thx Phil!
GFS

Re: 1998 Suzuki 225hp DT225T
 

Anyone want to make an offer?