Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   Repairs/Mods. (http://www.classicseacraft.com/community/forumdisplay.php?f=6)
-   -   livewell removal in 20sf (http://www.classicseacraft.com/community/showthread.php?t=19905)

Blue197320 01-12-2009 11:18 PM

livewell removal in 20sf
 
has anyone with the in floor livewell removed it before? i think mine is leaking at the thru hull. i want to take it out and put a strainer down there and reseal the whole thing. i think it might be cabosiled to the floor and stringers? if thats the case that means its in there. it has been out before because around the perimeter of the well its got screws in it. ill post pics tomorrow when i see the boat.

reelclassic 01-13-2009 10:03 PM

Re: livewell removal in 20sf
 
Yeah I removed mine....Remember I made that through hull my pick up for the wash down pump.....

gofastsandman 01-13-2009 10:30 PM

Re: livewell removal in 20sf
 
65 Bowrider has mine. Best thing I ever did. All systems for that become clear. Mine is an `89 so not sure that translates. Check post wide open for b4 pics.
GFS

Blue197320 01-13-2009 11:08 PM

Re: livewell removal in 20sf
 
yea i remember you took it out. im just tryin to put a strainer down there and put the livewell back in.

reelclassic 01-13-2009 11:19 PM

Re: livewell removal in 20sf
 
I dont see a problem doing that....

ElBichoMalo 01-14-2009 07:48 PM

Re: livewell removal in 20sf
 
How do you take it out? Have to cut it out? I thought the screws were just for the "lid" with the smaller opening in it, but never tried to give it a tug I guess. I want to remove mine and just leave the bilge access, as I will be using a leaning post style baitwell (and that would be a nice hand hole to plumb the dang thing, too).

Blue197320 01-14-2009 08:54 PM

Re: livewell removal in 20sf
 
well i think mine has been out before because i think the floor has been done at some point even though it has some bad spots. im gonna work on it tomorrow after work.

Blue197320 01-15-2009 07:56 PM

Re: livewell removal in 20sf
 
ok... its not coming out. its part of the inner liner. :( i guess ill have to let it leak from there forever.

gofastsandman 01-15-2009 08:58 PM

Re: livewell removal in 20sf
 
I cut mine out w/ a sabre saw , and it was not attached w/ anything on the bottom .
GFS

Blue197320 01-15-2009 08:59 PM

Re: livewell removal in 20sf
 
did you reinstall it?? im tryin to do that so i can fix the leak at the thru hull.

Blue197320 01-15-2009 11:46 PM

Re: livewell removal in 20sf
 
[image]http://i62.photobucket.com/albums/h1...0/IMG_0675.jpg[/image]
[image]http://i62.photobucket.com/albums/h1...0/IMG_0673.jpg[/image]
[image]http://i62.photobucket.com/albums/h1...0/IMG_0674.jpg[/image]

gofastsandman 01-16-2009 11:50 AM

Re: livewell removal in 20sf
 
Yours is quite different than mine. Mine is about 24" square.
I left it open for maintenance access. Having trouble w/ photobucket. I`ll try at work on Mon.
GFS


All times are GMT -4. The time now is 12:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft