1973 23 ft SeaCraft center console potter built
 

Classic 1973 SeaCraft 23 ft center console potter built boat for sale EXCELLENT CONDITION

1994 Merc Cruiser I/O 260 horse motor well maintained. Heads taken off, rebuilt 2001. Runs great.

New Alpha One outdrive 2006

New Lenco electic trim tabs 2007

New white SeaCraft seat, rail cushions 2007

SeaHawk float on trailer purchased 2007

Boat has been wired for electic reels

Tee top was taken off and painted white

Electronics: Garmen 10 in color plotter and depth sounder, Furuno radar, Furuno GPS navigator, Raytheon ship to shore radio, Jensen AM FM CD radio and weather receiver, 2 speakers, Si-Tex depth sounder

New 100 gallon aluminum fuel tank.

Asking price $23.000.

Contact Chip (508)-740-4729
Location, West Chatham, MA

**I am having a hard time loading pictures into this listing. Until I can resovlve the problem, please contact me and I can email you quite a few pictures.**

Re: 1973 23 ft SeaCraft center console potter buil
 

Is this "WRATH"?

There is a nice io 23 with a for sale sign that can be seen from 28.

If so, I can vouch for it being a great looking boat. Located not less than 1/2 mile from the awesome 27 tug, the last few albin 26's, and chatham fish brine tanks. Talk about good karma.

Re: 1973 23 ft SeaCraft center console potter buil
 

This is THE WRATH! Thanks for the nice comments! Hopefully soon (as in Fri 7/31) I can get some pictures loaded up.

Re: 1973 23 ft SeaCraft center console potter buil
 

Ok look forward to those photos. I told a few of my buddies about your boat, we'll see if there are any bites. Good luck with sale.

Re: 1973 23 ft SeaCraft center console potter built
 

Here are a few pics

http://i233.photobucket.com/albums/e...t/100_4560.jpg

http://i233.photobucket.com/albums/e...t/100_4562.jpg

http://i233.photobucket.com/albums/e...t/100_4566.jpg

http://i233.photobucket.com/albums/e...t/100_4557.jpg

http://i233.photobucket.com/albums/e...t/100_4567.jpg

http://i233.photobucket.com/albums/e...t/100_4059.jpg

Re: 1973 23 ft SeaCraft center console potter buil
 

wait are those 130s included?

Sick looking console.

Re: 1973 23 ft SeaCraft center console potter buil
 

Danny, thanks for the help with the pictures!

KenB, I have two of my 130 tuna rods for sale (not included with the boat...) please contact me if interested.

Re: 1973 23 ft SeaCraft center console potter buil
 

The Boat looks great in the water Chip, next time out I will take some pics. Did you catch any?

Re: 1973 23 ft SeaCraft center console potter buil
 

Thanks Kernel! Maybe I'll see you out there tomorrow!

Re: 1973 23 ft SeaCraft center console potter buil
 

Is that an inboard with a jack shaft?

Re: 1973 23 ft SeaCraft center console potter buil
 

HI, no, it's an I/O. Thanks for asking!

Re: 1973 23 ft SeaCraft center console potter built
 

is it Fresh Water Cooled?

Steve

Re: 1973 23 ft SeaCraft center console potter built
 

Hi, no, it is "raw water" cooled. Thanks for asking!

Re: 1973 23 ft SeaCraft center console potter built
 

How much is the dry weight of you boat?

Re: 1973 23 ft SeaCraft center console potter built
 

Hi, the dry weight of the boat is 3,300 pounds.

Re: 1973 23 ft SeaCraft center console potter built
 

This boat looks alot like mine 73 i/o same colors. Nice boat .Is the board behind the leaningpost in the picture to help get the tuna onboard?

Re: 1973 23 ft SeaCraft center console potter built
 

Hi, yes, that piece of wood is a custom made tuna slide.

Re: 1973 23 ft SeaCraft center console potter built
 

The tuna slide and a live well are included with the boat.

Re: 1973 23 ft SeaCraft center console potter buil
 

Any takers? Hope it is going well.

Re: 1973 23 ft SeaCraft center console potter buil
 

Not yet..Thanks for asking! I am still fishing it for the commercial bass season. Then, most likely tuna fishing this fall if it does not sell before then...Chip

Re: 1973 23 ft SeaCraft center console potter buil
 

Dunno if you saw the BFT that flipped the seacraft in the bay. Any thoughts? Do you have any action shots of that tuna slide in action?

Re: 1973 23 ft SeaCraft center console potter buil
 

Not that anyone needs convincing of the sc ride, but i can attest to the rock solid tracking of the i/o in the slop. Mine's a tank. Not that I need one, but I priced out a new, complete motor from merc this year for 6000. Not a bad repower price if it ever comes down to that.
Good luck with the sale.

Re: 1973 23 ft SeaCraft center console potter buil
 

The boat is still for sale, so I am still fishing, of course! I have seen the great whites off the tip of Monomoy - swam right under the boat. They seem to be laying in Butler's Hole until feeding time - the seals. No pictures of the tuna slide in use...too much action when a giant bluefin is caught. Maybe next time I go out, I'll have someone bring a camera. I'll post the picture - of course, if I'm lucky enough to catch one this year!!

Re: 1973 23 ft SeaCraft center console potter buil
 

Thanks for the nice plug for the I/O. I prefer it - gives a nice ride. The boat is a dry boat - not a wet ride at all.

Re: 1973 23 ft SeaCraft center console potter buil
 

Tuna slide shot..not the Wrath but...

http://www.classicseacraft.com/steve...edium/0009.jpg

Re: 1973 23 ft SeaCraft center console potter buil
 

is that a slide in the pic or more of a teeter board? the wood looks a lot longer than a slide? hmmm...this is on my short list for the winter.

Re: 1973 23 ft SeaCraft center console potter buil
 

It's hard to tell from the picture. My tuna slide seems wider. So, that may be a tetter board in the picture.

Re: 1973 23 ft SeaCraft center console potter buil
 

HI, the boat is now in Harwich (Cape Cod) in case anyone is interested in looking at the boat. My new email address is chipmorgan@charter.net.

Re: 1973 23 ft SeaCraft center console potter built
 

Haven't been to this site for awhile. The boat is still for sale, although it is in a different location in Chatham. Please email me if you would like to take a look. Chip

Re: 1973 23 ft SeaCraft center console potter buil
 

Hey I took that picture,back around 1978 or 80.
Thats Jerry Kissel

Re: 1973 23 ft SeaCraft center console potter buil
 

what a awesome pic,I am gonna have to design myself a folding slide out of 1/2" lexan for the cockpit of my 18SF

Re: 1973 23 ft SeaCraft center console potter buil
 

Boat is still for sale...Now can view in Chatham. Price is reduced!!! Contact me for info, Chip 508-740-4729 or at chipmorgan@charter.net

Re: 1973 23 ft SeaCraft center console potter buil
 

I was curious about fuel burn, do u have any #s .I just bought the same boat back in December except a tr drive and carb . Also came set up with a tip board and winch set up but previous owner said not to pull over 350 over the side ? Good luck with the sale wish I had seen it before buying mine

Re: 1973 23 ft SeaCraft center console potter buil
 

Hi, there are so many variables that affect the fuel burn - wind speed, wind direction, tide, etc - that it's tough to give you an answer... I pulled an 800+ pound tuna up my tip board (tuna slide), so I think that number the previous owner gave you is low... Or maybe you need a new one. Good luck with your new boat! Chip

Re: 1973 23 ft SeaCraft center console potter buil
 

TUNA ROD(S) MAY BE NEGOTIABLE WITH BOAT
CHIP

Re: 1973 23 ft SeaCraft center console potter buil
 

HELLOOOOOOOO.........

Nice to see you arrr still arrround. ;)

Tile man
 

Is boat still for sale ? Silveriotile@hotmail.com

Also interested if still for sale. TPE32@comcast.net

I think it is
 

I think the boat is still for sale, I know it was not sold because it is sitting in my backyard in Chatham Ma. I will contact Chip tomorrow via phone and have him respond.

Thanks,

Dan

Yes! The boat is still for sale... Price is now negotiable...Call me at 508-740-4729