![]() |
23 Sea Craft 87/09
1987/2009 23’ SeaCraft Center Console
This boat was totally rebuilt/upgraded in 2009 and features the following: • Awl Grip Paint outside & inside. Color-Snow White • Custom Awl Grip Paint bootstripe. Color-Black • Nonskid Deck and topside. Color-Snow White • Old floor was cut out and new floor was installed and raised approx 2” to accommodate additional weight of new transom and transom bracket. • Transom completely enclosed. • A&J Marine Transom Bracket. • Rub Rail-Rigid Vinyl w/ SS insert. • Leaning Post with 45 gallon live well. • Rule Bilge Pump • Richie Compass-New • Raymarine C80 Chartplotter & Digital Sounder w/thru hull transducer. • ICOM VHF w/ 8ft Shakespeare Antenna. • Sony Marine CDX-H905IP CD/MP3 Radio. • 2 Poly Planar 6X9 Speakers (Back). • 2 Poly Planar 6” Speakers (Front). • Sea Star Hydraulic Steering • Morse Control • Yamaha Wiring Harness & Ignition Switch-New • Yamaha Digital Tach-New • 1999 Yamaha 250hp OX66 Saltwater Series. Motor has a new lower unit and MANY other new parts. New computer & stator. Have receipts for all parts and labor performed. Runs VERY well. • Stainless Steel 3 blade prop-New • 138 gallon fuel tank-passed pressure test • Aluminum Trailer w/ new tires and new LED lights. • Clear title and current registration. This boat was completely stripped down and totally redone spring 2009. Every hose, wire, connector, fitting, electrical, and plumbing is new. All electronics and accessories are new. $21,000.neg. Richard 979-482-6686 http://i704.photobucket.com/albums/w...tonTrailer.jpg http://i704.photobucket.com/albums/w.../FrontView.jpg http://i704.photobucket.com/albums/w...IntheWater.jpg http://i704.photobucket.com/albums/w...os/rearqtr.jpg |
Re: 23 Sea Craft 87/09
Real pretty boat!Nice,clean lines. Good luck with the sale.
|
Re: 23 Sea Craft 87/09
Thanks Joey. This boat has been alot of work costing alot of time and $$. I Love this boat, but went way over budget (39K in 09'). I've loved the lines of the 23 SC for years. I hate to get rid of it, but something that I need to do.
|
Re: 23 Sea Craft 87/09
beautiful girl don't do it....i wish it was around a year and a half ago i'd be on my way to you right now :)
good luck with the sale great looking boat and it's done you should get some pics of the wiring and anything else you can't have to many pics plus we love SP(seacraft porn) |
Re: 23 Sea Craft 87/09
Reduced to $18,500.00
Located 45 min. south of Houston, TX. A beautiful boat at a steal of a price. |
Re: 23 Sea Craft 87/09
Is there a trailer included? I'm in Tampa fl and interested but trying to figure out transportation.
|
Re: 23 Sea Craft 87/09
Yes, trailer in pic is included. Has 4 new tires. I'll even have the bearings re-done.
I'll drag it Tampa for 21K!! Come check it out first. |
Re: 23 Sea Craft 87/09
Does it have a head in the console?
|
Re: 23 Sea Craft 87/09
No..but I'll give you a 5 gal. bucket FOR FREE,..and a pack baby wipes! :D
|
Re: 23 Sea Craft 87/09
Nicely Done Richard,
Do you have any pictures of the cockpit? An estimate of hours on the motor? Max width on the trailer? Thanks -Rob |
Re: 23 Sea Craft 87/09
beautiful boat. Very clean style / rebuild.
Has anybody else noticed that the VHF ant is mounted in a different location in every picture???? |
Re: 23 Sea Craft 87/09
77 Sceptre- yea I move it around to play with peoples emotions, but seriously, it is mounted with ss bolts & nuts to the port side, on top of the console. I dont know how your seeing it.
RobErnst- I will get the info. requested. Thanks for the comments. I spent alot of time fishing in FL and like the lines of many of the smaller custom boats, it was my goal to make this boat as clean as possible. There are not many custom style boats here in TX, every one over here jumps on the Contender or some other brand bandwagon (not that they're bad boats, just everone has them). I'll try to post some pics of the build and the interior. |
Re: 23 Sea Craft 87/09
Quote:
|
Re: 23 Sea Craft 87/09
LOL!!! :D :D :D :D :D You got me too!
|
Re: 23 Sea Craft 87/09
I remember this boat from Craigslist late last year or early in 2009 (Conroe Texas), I ran the numbers to do the work you have done. I think it is a fair asking price and a great looking rig.
|
Re: 23 Sea Craft 87/09
What's the deadrise on the hull? And how fast can that 250 move that boat? How deep is the cockpit at the stern?
Really nice looking boat |
Re: 23 Sea Craft 87/09
Quote:
hav U bin dippin in da shine? a questyon lik dat on dis site be *blasmphemy*.. *i had to looks up how to spel it---ha ha ha sam |
Re: 23 Sea Craft 87/09
I would also like to know the fuel burn #s with the 250hp ox66 out back.
Good looking boat. |
Re: 23 Sea Craft 87/09
I'm guessing the fuel burn is 2+ or so, I really have not ran the numbers. We usually fish one day (35 or so miles), and then take the family boat riding the next couple of days/sneak in another fishing trip, then fuel up. Just had the bearings changed & greased today, ready for the highway! I'm taking it down south to Rockport, TX for where there is more traffic.
|
Re: 23 Sea Craft 87/09
Must be a bad market... Have had nothing but a bunch of tire kickers.. New asking price 45K!! Thats what I've put in it in the past 9 months.
|
Re: 23 Sea Craft 87/09
Pretty boat. I'd suggest listing it as far and wide as possible......even on sites that may not be thought of as 'boat sites' (craigslist, etc).
|
Re: 23 Sea Craft 87/09
Hi there,
You still on the island ? Is your boat still there as well ? I PM'd you earlier |
Re: 23 Sea Craft 87/09
Still for sale
|
Re: 23 Sea Craft 87/09
I am shocked you havent sold this boat yet!?!?! I may try and get someone over to you to have a run and look at it if possible?
Im still in Australia, but with the $US in the shitter (it's almost 1:1 now),its looking alot easier to bring something over. |
Re: 23 Sea Craft 87/09
$17,000.00 FINAL asking price.. This is a STEAL and ya'll know it!!
Richard 979-482-6686 |
Re: 23 Sea Craft 87/09
bump for a sweet boat.
i have a question for you about the boat. i just bought an 87 23'. does yours have wood stringers or are they foam filler glass like the older ones? i havent cut mine up yet but im still wondering. thanks |
Re: 23 Sea Craft 87/09
Do you have any photos of the new floor and floor hatches, also any pics of the work being done floor & transom? Are all the thru hulls new and what are they made out of? Does it have trim tabs?
Thanks |
Re: 23 Sea Craft 87/09
It has the glass stringers w/foam fill. I cut a few test spots with a hole saw just to double check for water intrusion- they were all dry. I'll try to post some pics to the thread. No trim tabs, but for this price you can afford your own.
|
Re: 23 Sea Craft 87/09
there are more pics on yachtworld, tebh boat is now listed with Texas Sportfish & Yacht Sales. Except for the fish box drain, all through hulls are new. The ones on the prt & stb side are for live well drain and bilge- they are poly or nylon-cant remeber. The two in the transom for the deck are bronze. There is also one brass thru. in the bilge w/a strainer outside of the hull, this one has a block valve-this is for the live well. the live well is 45 gal. and keeps em' alive while your running.
|
Re: 23 Sea Craft 87/09
This will sell when people get itchy with warm weather.
|
Re: 23 Sea Craft 87/09
Richard,
I am very interested in your boat. It's beautiful. I'm not sure when they stopped building Potter hulls but I guess it was before 1987. Not that that matters too much as it's still a Seacraft. I would need it trailered to Jacksonville Florida which I guess would cost about $1400. Does that sound right? I see your latest price is $17,000. Is that correct? Thanks, Peter |
Re: 23 Sea Craft 87/09
Quote:
We are all on the public trough in the states... :eek: Hope and you can keep the change! See ya (I hope), Ken |
Re: 23 Sea Craft 87/09
Nice looking boat! How many hrs on the motor? Also why did you get rid of the vents in the back but left the ones up front? thanks Dan
|
Re: 23 Sea Craft 87/09
The vents help keep air circulating through the bilge which from what I've read helps keep things from corroding/deteriorating as quickly. I closed the ones in the back
1. To keep out water when fishing the choppy Gulf of Mexico 2. It looks cleaner 3. I kept the ones in the front to help with circulation 4. Though not a "Potter" it would not be a classic Sea Craft with out the vents. |
Re: 23 Sea Craft 87/09
STILL FOR SALE!!
|
Re: 23 Sea Craft 87/09
Is any body selling anything?? I want to buy, but wife says this thing has got to go first!
|
Re: 23 Sea Craft 87/09
The only boats im selling im giving away, and sometimes thats still not enough. Hang in there the buyers are out for blood but you will find a buyer who can appreciate that sweet 23
|
Re: 23 Sea Craft 87/09
Richard, I am still interested - Bill in Pa. Been on line looking for transport $$ to the northeast (Philly)- so far $2100 tows the 23 to my front door. I was informed today that I may need to go to Zurich for ~3 years for work. I haven't looked at t-port cost to Zurich, but I may need to put a clause in my re-lo to move the boat. Once my work location discussion calms down, I'll give you a call.
|
All times are GMT -4. The time now is 04:04 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft