Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   E-Tech Score (http://www.classicseacraft.com/community/showthread.php?t=21419)

FELLOW-SHIP 03-25-2010 01:51 PM

E-Tech Score
 
Well even a blind monkey finds a Banana every once in a while.

I went to the Dania Marine Flee Market and found E-Tech low profile bow rail fittings for the grab rail that goes around the bow of my 23 CC they are Ύ” pipe fittings cost me $40 to do my boat.
This week I went to a aluminum fabrication shop to bend me up two 15 foot aluminum 6063 T5 Sch 40 pipes. My bet I will save 50% on this upgrade.

I kept the old fittings if any one needs them.

New E-Tech

http://photos-b.ak.fbcdn.net/hphotos..._7995624_n.jpg

Old stuff

http://hphotos-snc3.fbcdn.net/hs429...._8192837_n.jpg

FellowShip

………………………….

Just for the Grins :D :D :D

Official Antique Classic SeaCraft Owner

workinpr0gress 03-25-2010 02:59 PM

Re: E-Tech Score
 
That is a nice score, everyone should win sometimes. Lol

eggsuckindog 03-26-2010 01:29 AM

Re: E-Tech Score
 
nice

Old'sCool 03-26-2010 06:57 AM

Re: E-Tech Score
 
Any chance you would make a dimensioned drawing of those for me?? :)

red20 03-26-2010 11:00 PM

Re: E-Tech Score
 
were those on isle 6?

FELLOW-SHIP 03-27-2010 08:23 AM

Re: E-Tech Score
 
Hi Red 20

I really don’t know which isle they were on but they were about 2 or 3 isle’s from the most northern isle at the flee market. They sold a lot of different new E-tech products mostly for marine metal fabrication shops. They must be a distributor for E-tech and have first shot on extra new stock that has not been picked up or over stock items.

Reelescape1

The dementions are
2 ½” high that’s the part that is above the 90 degree lip of the boat. There is a screw part that fits under the lip.
The outside demention is 1 Ό”
The hole that the pipe runes through is 1 1/16”
The aluminum pipe size is Ύ” pipe is measured by its inside demention
The aluminum pipe outside demention is just over 1”
The pipe catalog id is 6063 T5 Sch 40
This is the same bow rail that SeaCraft, Contender and a lot of other OEM’s use on their boats and is much better that the original equipment SeaCraft used 30 years ago.

FellowShip

………………………….

Just for the Grins :D

Official Antique Classic SeaCraft Owner

red20 03-27-2010 09:31 AM

Re: E-Tech Score
 
I bought some stuff from them too but didn't see those :( - Maybe next time. Sure could have used them on my boat. I wonder if they are local and sell them as scratch & dents?

FELLOW-SHIP 03-27-2010 10:11 AM

Re: E-Tech Score
 
Hi Red20:

E-Tech in up the road approx 100 miles, I don’t know the guys that had the booth. They had a box of these fittings and I got approx ½ of them. If you go to their web sight they have a catalog and phone # for retail buyers or maybe they know who worked the Marine Flee Market.
The guy said they were over stock items that someone did not take or they got back. Nothing I got looked scratched or damaged in any way. I worked for Bennett Marine and we were very fussy on that it seemed to me that all the stock on the booth looked new and undamaged just like the Taco booth, Tigress booth, and the Lenco Trim tab booths. I was there Friday during the day and it looked like the first one that spotted the fittings.


FellowShip

………………………….

Just for the Grins :D

Official Antique Classic SeaCraft Owner

strick 03-27-2010 12:16 PM

Re: E-Tech Score
 
The old salt with the keen eye scores :D I was looking for some of those when I had my 23 but could not find any. Thats a great score!

strick

Old'sCool 03-28-2010 12:07 AM

Re: E-Tech Score
 
Thank you!

red20 03-28-2010 09:16 AM

Re: E-Tech Score
 
That's why I love the Flea. You go with a list of stuff you think you need only to find items you didn't even think you'd find. I've been attending the Dania Flea for at least 20 years.

I was there on Friday too but didn't have those on my radar. I know I could buy them retail but now I have another item to dig for at the next Flea.

FELLOW-SHIP 04-06-2010 04:08 PM

Re: E-Tech Score
 
Well the new rail is in and looks Cool. Got a local guy – Garrett Towers to bend me up some pipe and fit perfectly.
Went out fishing last Friday and got 1 Sail about 6 ft, one amberjack approx 40 labs and a few dolphin I guess the fish likes the new bling bling.

http://sphotos.ak.fbcdn.net/hphotos-..._8118365_n.jpg

http://hphotos-snc3.fbcdn.net/hs390...._3717874_n.jpg

FellowShip

………………………….

Just for the Grins :D :D

Official Antique Classic SeaCraft Owner

DonV 04-06-2010 04:54 PM

Re: E-Tech Score
 
Quote:

I guess the fish likes the new bling bling

Add me along with the fish......I like it too!!! Very sweet.

Old'sCool 04-06-2010 05:26 PM

Re: E-Tech Score
 
Yea, that's nice and clean!


All times are GMT -4. The time now is 11:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft