![]() |
Corner box Lids on 23 and Misc items
Hi guys i am restoring a 23 Inboard and i am looking for the 2 transom box covers/lids for the cap. does anyone have a mold or have any laying a round i could take off their hands
ps i have some items I can offer up to other owners.. full original bow rail in good shape. I have a t-top that is functional but could use a clean up.. and other items.. thanks Jim |
Re: Corner box Lids on 23 and Misc items
I would be interested in the original bow rail if it is in good shape. How much r u asking?
|
Re: Corner box Lids on 23 and Misc items
Its pretty long to ship to fla.. its 2 sections about 12ft each. if you want it its yours.
jim |
Re: Corner box Lids on 23 and Misc items
T top?!? Hummm. Have any pictures
|
Re: Corner box Lids on 23 and Misc items
Matt I emailed you pictures
jim |
Re: Corner box Lids on 23 and Misc items
|
Re: Corner box Lids on 23 and Misc items
Pictures sent.
anyone help me out with the lids ?? jim |
23 stern corner box/hatch lids
Does anyone have the corner storage lids for a 23 would rather have fiberglass and paint them with the hull then make them from starboard..
I still have the bow Rail free to anyone who can pick it up.. straight and ready for service.. Jim |
I made my own corner box lids....and I suck at making these fiberglass parts. Mine are just about 4 layers of glass...no core...and they are holding up great. Used white pigment epoxy and painted to match.
http://i155.photobucket.com/albums/s...c/pic001-2.jpg http://i155.photobucket.com/albums/s...c/pic020-2.jpg http://i155.photobucket.com/albums/s...c/pic022-2.jpg http://i155.photobucket.com/albums/s...c/pic007-1.jpg |
2 lids
Did you ever find your lids ?
|
Good to see you back Craig....:)
|
corner lids
No I never have still needs to find them or i am going to make them as a last resort.
I see the Pix on making your own thanks for sharing. I will give that try if i cant find some.. jim |
rear Corner box Lids for Inboard
Thought i would take a last shot
Does anyone have the corner lids they arent using. Boat is almost done and I still need these lids. jim |
Mine were teak and I made new ones out of teak and epoxied 3/4 marine plywood to the bottom for more support .( same as original )
|
I have the factory ones on my boat. It will be up at hermco here pretty soon. Maybe he could make a mold of them. My boat also has the molded long center doors in between the two out doors. I am not sure how the boat was originally configured other then it was a I/O.
It was converted to a bracketed out board when I purchased it years ago. I always assumed the large engine box was removed at the rear of the cockpit and someone installed to large molded doors. It sure makes accessing the bildge easy but over the years they are starting to get a little flex to them. If you stand on the center of them. |
corner box lids
thats great thanks for the offer. can you let me know when it goes there and i will give them a call..
thanks again jim 732 996 3897 |
All times are GMT -4. The time now is 02:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft