Free Windshield
 

In the process of redoing my 1989 20 SF I narrowed my console rendering the windshield unusable for me. It's in pretty good shape but does have some crazing at the corners and along the 2 trailing edges. The outside width is 36" and the thickness is at least 7/16". It also has 4 small holes on the starboard side that were probably for an antennae mount. It's not perfect but definitely serviceable if it fits your needs. I would just ask that you pay shipping. Photos below.
Rod Anderson

Inside length is 36" and the ends are 11 1/2"

I would like to talk to you about your other mods you're doing including narrowing the console, I have the same boat and if I don't sell it, may consider some changes, call me when you have a moment,
Jim
7276565142

So how do I get it to Miami?

I'll pack it in cardboard and drop it off at UPS :)

Let me get some measurements in the morning

Okay, sounds good. Feel free to call if it's easier.
Rod
631-834-4580

Just measured my console measures 37 3/4 wide

I don't think it will fit

But thanks anyways

i would love to have it, i will measure mine this afternoon and let you know. thanks.

I'll add inside dimensions later today. I should have done that in the first place :rolleyes:
Rod

So tell me, how does the 20SF track when poling?

I have no idea, it was on the boat when I got it last year. I just stand up there and cast, it even has a "senior citizen rail so I can't fall off the back of the thing, lol! I'll try to pole it when I get it back in the water, could be interesting :D

I have a tinted one and would love a clear which yours appears to be - wonder how much to ship it, you seem to kinda know. With the tinted I can't see with sunglasses on and zip at night LOL

Tampa

Unfortunately mine is tinted as well. It's not real dark, more of a medium tint but it could be an issue at night with shades on :D

I was talking daytime, mine is dark - but I usually have a half tank of gas, a pack of smokes and I did win a halloween contest once as the Blues Bros

Here is a better photo in the sun so you can see how light the tint is.

Forgot the pic:rolleyes:

I could tell it was much lighter than mine, just wonder if it would survive the trip and its such a bulky item how much.

I have some scrap styrofoam I could tape inside and then wrap it with cardboard. Give me an address or zip and I'll get a UPS quote if you want.

zip is Tampa 33609, just a ballpark idea would be fine

See if it will fit first dog. Not sure it will fit the earlier boats. If it won`t work for you Dixon, I`ll get in line for my 89.

I already measured, its pretty damn close from the tape in the pics. I hate having to look around/over the windshield

I'll have him measure the width at the front inside exact beforehand just to make sure, thats the only issue but it seems to be within 1/4" from what I saw - hieght is no issue as is depth. Just need to make sure it goes around the front of the console

Inside dimensions are at the bottom of the first post. 36" at the inside front edge. Please bear in mind that the windshield is far from perfect but very usable. Just don't want anyone to be disappointed :)

I'll double check it - mine is crazed like yours and has crack on the side and I can see thru it - will measure again tomorrow but I think it works

Shipping is going to be right around $60 to Tampa. Even though it only weighs 14 lbs it's the shape that jacks up the price :(

I figured that, I'll get out there whe it warms up some and re-measure just to make sure because it is very close

My console is exactly 36" and my windshield is 36 1/4-1/2 for rubber spacers - so don't think I can get it around the console edge

Oh well it was a good try. My console had a recess around the top and it measured about 35 1/2" so there was plenty of room. Hopefully somebody else can use it :)
Rod