1970 20' SeaCraft SF (Restored)***Pics Added***
 

Boat was professionally restored by Parker Yacht in Ft Lauderdale, completed February 2009.

Restoration items.

• Complete restore with new AlexSeal paint, Hull and Deck Aqua Mist, interior and cap, Snow white, boot top Jade Green. Bottom paint Micron 33 red.
• 1999 200 HP OX66, completely repainted to original with new decals, full service, water pump, fuel pump, O2 Sensor, etc.
• New 704 binnacle control.
• New SeaStar Hydraulic steering.
• Lenco Trim Tabs.
• New Coosa Board transom, all glass work done with vinylester resin.
• Transom engine well was reconfigured.
• Console completely redone and cored with composite.
• All hatches custom composite construction.
• Dual custom swim platforms, composite construction, SeaCraft Logo embossed in.
• New windshield.
• New King starboard hatch and trim bullnose in console.
• New 46 gal aluminum fuel tank, mounted under the deck
• Stringers filled with foam and re glassed.
• Deck is original and solid, cap was reinforced.
• All new tinned Pacer Marine wire, with Custom Seacraft panel and backlit engraving, switches.
• Led lighting, interior, white or blue.
• Sea Vision u/w LED light.
• In console LED lighting.
• (2) 12v plugs.
• Odyssey AGM (2) batteries with switch.
• Birdsall Rocket launcher with backrest, cup and rod holders.
• Custom sewn cushions by Wycap Design.
• Flush mount Pull Up SS Cleats.
• Custom SS windshield handrail.
• Custom SS heavy duty bow tow bit.
• Rod holders re chromed, original.
• SS Flag staff holders for and aft.
• Fusion IPOD IP600 stereo, JL Audio speakers (4) 7”, subwoofer 9”, 2 amps.
• F/W wash down, 6 gal tank.
• 2 Rule auto bilge pumps, Ultra Safety Systems auto switches.
• Garmin 440s GPS with sounder, Icom 422 VHF ext VHF speaker.
• All new SS flush mount latches and hinges, Premier.
• New white Taco PVC rubrail with SS insert.
• Rolls Aluminum dual axle trailer, new LED lights, trailer serviced.
*Exclusions: Edson Wheel, TUUCI Top*
$21,000 obo
Boat without motor: $18,000 obo
PayPal Transaction ID # 9VB19523CX611270D

Too pricey !!!

Nowhere near the cost of restoring one yourself!

You get what you pay for and little more here. Fine example of a A+ restoration.

AR

Nice boat. I just hope you get what your asking cause that will just make mine worth more;-)

You have NO clue!!

In 1989 I restored my beloved "NoBones" 20 SF!!
Straight-up, it cost over $31K.... Myself doing the
majority of the work!!

Guess what? 24 years later she is still rock solid..:cool:

This boat of Cayman's was done professionally!!
With and estimated cost of $40K-$45K..

Try doing one for any less then this and you will get what you
pay for!

Cayman's is a bargain!

Nice ride.

I'd buy it in a minute.

Hey Ken, I don't think some folks have priced QUALITY 20' boats lately!! You know, the ones that come with less than 1/4" thick hulls, paper thin gel coat, cheap hardware, no electronics, etc., etc. I just saw 40+ of them at the last show in Tampa. $21k won't buy you poop!!!

your right I installed a baitwell drain in my hull restoring and couldn't believe the thickness almost 5/8" on the side

http://i782.photobucket.com/albums/y...t/5448f1ec.jpg

Try a 17 foot Boston Whaler for 30k.

I bought a used Whaler a few years ago 17' (cheap) it was a 98 and the original bill of sale was for 21k.

This boat and Stricks are bargins!

a new Maco 204 with a 150 merc list for 32k without trailer , electronics. rigging, prep ,freight charges and tax.
I think he priced his too cheap.
nice Boat !!! Good luck with the sale.

I thank everyone for the kind comments, (ok, so one doesn't have touch with reality).
The reason for the sale is, I am (re) building a new 20' SeaCraft. Coming soon to waters near me. :-)

And Mods, what's up with the one file at a time upload? :-)

Amazing, bargain of the year!

Worth every penny. To the fella that says it's too pricey go and build one yourself then. :) good luck Oly !

Last Sun found me at the wpb show. An Albury 20 was 65K
rigged. The sting of being cheap lasts forever. The sting of
paying for quality fades quickly. c 2113

She would look nice down here in the keys!!!!
 

I live in Islamorada and have a 1974 restoed/refurbed 23.5' Chris Craft Tournament Fish lapstrake hull inboard that sleeps on a rack indoors as would yours, meaning I really don't need the trailer. Could we do something price wise with the trailer like you are willing to do with the motor? Speaking of motor, I really don't know outboards well, is yours carbed or EFI and EFI how many hours are on it. Also, would you object to having a survey/sea-trial done on her??---thanks and hope to hear back----Steven

Steven,
Sure, we can work something out on the trailer.
0X66 is first generation EFI, not carbed, 900 hrs approx.
And yes, we can make the sale subject to survey/sea trial.
You can either PM me or e-mail
obparker@att.net
me with the nitty gritty.
OP

Sorry--just getting back from fishing all day today--
 

Weather was great today so why not go out and fish--just now getting back and now have to clean both the boat and the catch, so I won't have time to talk to you today, just come inside to make a stiff drink or 2 or 3---I will give you a buzz and chat--thanks--Steven

***Sold***

Congratulations. To both of you!:cool:

Congrats on the sale hope all is happy.LCW

looks like a new member

congrats on the sale!

I don't think he is, no one that posted here bought it.
Funny story though, I still haven't met him, met his family, really nice people.
Boat went to a good home.

Awesome. Congrats on the sale. Hopefully illl be able to move mine.

PM sent