68 SeaCraft Seamaster / Located in Atlantic City NJ
 

For Sale: 1968 SeaCraft Seamaster Flybridge
I bought this boat to do a full restoration. COVID pretty much ruined my chances of getting her into the local shop this winter. I decided to go a different direction. My loss your gain. The hull is solid. Its has a custom made aluminum flotation bracket. Currently not attached. The glass is rough looking but the local shop felt good about bringing her back with high build primer and paint. What you see is what you get. I have a clean title in hand for the boat and a bill of sale for the trailer. Someone scraped off the vin sticker on the trailer. The trailer tires are all new. I'm looking for $9,000 OBO. Would also consider a smaller bay boat of equal value. Happy to answer any questions.
Transaction ID: 1AK988101E4308645

All I can say is good luck...

After seeing classics that guys on here have brought back to former glory I have no doubt she will find a good home. Exhibit A

Where in AC is boat? I might want to check this week.

All Marine Center. 1501 Albany Ave ( formerly AC Boat Yard )

I can meet you there If you send me message on here. I will give you my cell.

posting hi resolution photos with a modern smartphone may help. best of luck.

Thanks! I did try that at first. It kept asking me to resize. So i saved as PDF and it let me attach a few in the first post. I will try again.

maybe try putting in a g drive folder and link. just want some better photos to see what I wont buy. now if it was a center console....

If you have an apple computer it is easy to resize...let me know and I can walk you through the steps.

Anyone ever make a center console out of one of these? Maybe stretch it a few feet?

Hold my beer!

Oh Oh My! Good luck. Subscribed.

Plop, plop, fizz, fizz.....
YIKES !!
You really have my attention now ...:)

Somebody get him a fresh beer.

You're just full of surprises, aren't you?

i can't fathom the courage required to run that cut...

31?

Remember he has that fancy laser/level he probably stuck it under the boat :)

strick

Well to record the transom is very easy now

I didn’t want to say anything but 31 Seamaster sounds pretty mean.

Carl himself said the boat was designed to be 30 ft. The military said NO we need 27' . The rest is history.

Knowing dirt it will be one bad azz machine when done ...

Sitting on the edge of my seat "without remote for TV"..

More later, for sure !

Exactly how i did it. Keep the cut perpendicular to chine and its easier to build the jig off of/lay glass etc... Ill start a thread when its further along, gotta do some massaging to get the hull straight before i do anything, years of crappy trailer bunk placement and rotten bulkheads have the middle panels all funked up!

Has this sold yet??

My wife said "NO!" and gave me THE LOOK.

27 Seamaster
 

Finally getting around to getting this boat sold. The boat is still for sale. Its located in Atlantic City NJ. Can be shown anytime.

Make an offer. I need to make room.

609-617-7911