Classic SeaCraft Community

Classic SeaCraft Community (http://www.classicseacraft.com/community/index.php)
-   General (http://www.classicseacraft.com/community/forumdisplay.php?f=4)
-   -   question on 1977 20ft seacraft (http://www.classicseacraft.com/community/showthread.php?t=11670)

el pescador 05-07-2003 06:09 PM

question on 1977 20ft seacraft
 
if the floor is all solid would there be a chance of bad stringers and how do u inspect them i could not find any place to inspect but in hatches at the stern and the trasom looked solid also could these items be o.k. as for the boat its not in but fair shape its been well used for fishing....

Mark 05-07-2003 07:19 PM

Re: question on 1977 20ft seacraft
 
el pescador,

I'm aware of two different stringer set-ups in the 20's. One version, like in my 1971 model had four individual stringers. Other boats had two rather wide stringers.

If the floor feels solid throughout, I somewhat doubt that the stringers have any problems. In addition, I'm not sure how you could verify that without pulling up the floor.

Although there were several problem spots on my floor, when the floor was removed, all four stringers looked about six months old - this, in a 1971 boat. These will now be raised to create a better-bailing-boat, as they all sat a bit low in the water. Let me rephrase: they all sat WAY TOO LOW in the water.

timd 05-09-2003 08:45 PM

Re: question on 1977 20ft seacraft
 
Pescador,
Where are you in TX? I have some experience with the SeaCraft 20. I rebuilt the transom in my 20, and I'll be happy to look at a boat with you. I'm in Austin. Let me know...

el pescador 05-10-2003 08:57 AM

Re: question on 1977 20ft seacraft
 
tim, i sent u a e-mail via this website


All times are GMT -4. The time now is 11:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft