Just venting ....
 

I know there has been some previous posts on removing or keeping the side vents.

I decided to keep them, but tried to replace the plastic style vents with SS flush style vents.

Problem, the Attwood (#1499, 3"x17") SS vents have only a 1/2" flange. The old plastic ones have a larger flange (3/4" or more?)

Does anyone know of another SS flush vents that are slightly larger to fit?

Thanks Nick

Re: Just venting ....
 

Back to the top, and get my # of posts up!

Any thoughts on this, before it starts to sink again ...

thanks Nick

Re: Just venting ....
 

Heres what I found so-far

Marpac #7-0092 ss

overall 4-5/16 x 12-5/8. Cut out 3-3/8 x 12
************************************************

Det Mar #327557 (7-2-10 white abs
#327569 (7-2-2) Black abs

overall 4-3/4 x 13 cut out 3-3/4 x 12-1/4
Depth 1" w 1/2 " flush height.
???
Scream'n Reels !

Re: Just venting ....
 

Gemlux, Gemlux vent page has (2) but they will not fit, figured I would post part #'s just in case.

# 763:
Vent Louvered 4.5 X 8.125 In, 3.5 X 7.25 In Opening, Requires 4 # 6 Fasteners

# 765:
Vent Louvered 4.5 X 12.875 In, 3.5 X 12 In Opening, Requires 6 # 6 Fasteners

Both are stamped stainless steel

Re: Just venting ....
 

The only thing I know to do is to build up the hole from the inside with fiberglass and then gel coat that will make the opening a little smaller for you to screw in the stainless vents into the smaller opening.
FellowShip [img]images/icons/rolleyes.gif[/img]